Penrose hardware
threebytesfull·penrose_hardware
About the Penrose hardware PCB
Penrose hardware is an open source STM32 PCB design by threebytesfull, published on GitHub. It is a 2-layer board measuring 94.5 × 108.5 mm, with 84 components from 26 distinct parts.
Its main chip is the STM32F303K8Tx, from the STM32 family. Other key parts include the AS1130-BSST, FT230XS and MCP1825S. By type, the board carries 41 diodes, 18 resistors, 14 capacitors, 4 ICs, 3 connectors and 3 switches.
From the project
Penrose project files
Main components on the Penrose hardware
Penrose hardware bill of materials (BOM)
84 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F303K8Tx | LQFP-32_7x7mm_P0.8mm_Clear | U1 |
| 1 | AS1130-BSST | SSOP-28_5.3x10.2mm_P0.65mm_Clear | U2 |
| 1 | FT230XS | SSOP-16_3.9x4.9mm_P0.635mm_Clear | U3 |
| 1 | MCP1825S | SOT-223-3_TabPin2 | U4 |
| 1 | DX4R005HJ5R2000 | DX4R005HJ5_HandSolder | J1 |
| 1 | ARM JTAG/SWD | FTSH-105-01-F-DV-K_HandSolder | J2 |
| 1 | SWD | Harwin_M20-88900445_1x04_P2.54mm_Horizontal | J3 |
| 3 | SW_Push | SW_SPST_B3U-1000P_HandSolder | SW1, SW2, SW3 |
| 36 | ARGB1313HS-TR_CommonAnode | LED_0808_Metric2020_CommonAnode | D1, D2, D3, D4, D5, D6, D7, D8 +28 |
| 1 | BAT60JFILM | D_SOD-323_HandSoldering | D37 |
| 1 | SML-D12D1W (orange) | LED_0603_1608Metric | D38 |
| 1 | SML-D12Y1W (yellow) | LED_0603_1608Metric | D39 |
| 1 | SML-D12V1W (red) | LED_0603_1608Metric | D40 |
| 1 | SML-D12M1W (yellowish green) | LED_0603_1608Metric | D41 |
| 1 | MPZ2012S601AT000 | L_0805_2012Metric | FB1 |
| 11 | 100n | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +3 |
| 2 | 4u7 | C_0603_1608Metric | C9, C11 |
| 1 | 470p | C_0603_1608Metric | C10 |
| 5 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 2 | 27 | R_0603_1608Metric | R6, R7 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100k | R_0603_1608Metric | R8 |
| 2 | 100 | R_0603_1608Metric | R9, R12 |
| 2 | 330 | R_0603_1608Metric | R10, R13 |
| 2 | 220k | R_0603_1608Metric | R11, R14 |
| 1 | 240 | R_0603_1608Metric | R15 |
| 3 | 560 | R_0603_1608Metric | R16, R17, R18 |
Penrose hardware design files
The KiCad project lives in the threebytesfull/penrose_hardware repository on GitHub; these links point at the commit this page was built from.
- Layoutpenrose.kicad_pcb
Penrose hardware: common questions
What microcontroller does the Penrose hardware use?
The Penrose hardware is built around the STM32F303K8Tx, from the STM32 family.
How big is the Penrose hardware PCB?
The Penrose hardware measures 94.5 × 108.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Penrose hardware?
84 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Penrose hardware design files?
From the threebytesfull/penrose_hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Penrose hardware design in my own project?
The repository has no license, so all rights stay with threebytesfull. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Penrose hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k