25 open source boards using the MCP1825S
Real designs built with the MCP1825S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Musicboard
julbouln
67.1 × 56.9 mm74 parts2LNo license31ESP32
Rc fabgl
PickledDog
99.1 × 49.9 mm46 parts2LApache-2.017Narrowband-SDR
BillyWoods
100 × 100 mm463 parts4LNo license16AVR/Arduino
MyGenWashy
mayermakes
147.8 × 106.3 mm54 parts2LGPL-3.011ADS1298 FINAL
node9909
189 × 117 mm233 parts2LNo license10ESP32
Ei O T
mayermakes
44.6 × 105.4 mm14 parts2LGPL-3.08ESP32
E9X-CAN-BT
Christian-Ristevski
74.8 × 49.8 mm88 parts2LNo license2STM32
AstroWeather
jakubprzybytek
185 × 30 mm113 parts6LNo license1STM32
Spha btni hardware
sillevl
103 × 86.5 mm112 parts2LNo license0STM32
Mdrv
hanneskiene
60 × 50 mm112 parts4LMIT0STM32
${DOC TYPE} Document
UVicRocketry
38.1 × 73.1 mm105 parts4LNo license0Carte mère V2
MathysPelletier
180.1 × 91.5 mm97 parts2LNo license0STM32
Spha rel12-hardware
sillevl
207.5 × 86.5 mm89 parts2LNo license0STM32
Penrose hardware
threebytesfull
94.5 × 108.5 mm84 parts2LNo license0STM32
Spha rel6-hardware
sillevl
103 × 86.5 mm70 parts2LNo license0PIC
Orca hana
funcoolgarage
71.1 × 35.6 mm33 parts4LMIT0AVR/Arduino
Atmega328p devboard
sam-james-harding
26.4 × 50.7 mm26 parts2LMIT0AVR/Arduino
Austroduino tutorial
mayermakes
68.6 × 53.3 mm21 parts4LGPL-3.00HDSEMG
node9909
150 × 86.9 mm207 parts2LNo license10ESP32
Typhoon Motherboard
hpvdt
73.5 × 52.8 mm51 parts2LNo license1ADC Breakout
UVicRocketry
101.6 × 50.8 mm46 parts2LNo license0ADS FINAL V1
node9909
99.2 × 99.7 mm201 parts4LNo license10AVR/Arduino
Rain Gauge v0.6.2
ARTS-Laboratory
36.1 × 54.3 mm11 parts2LCC-BY-SA-4.00STM32
MBO
shanteacontrols
390 × 78.2 mm45 parts2LApache-2.0956Hoop interface
evolutek
36 × 48 mm15 parts2LNo license0
How designs wire the MCP1825S
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the MCP1825S connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 18 of 22 designs, most often 4.7 µF (then 10 µF).
- The VO pin has a decoupling capacitor on 16 of 22 designs, most often 10 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 5V 77% · a signal 23% |
|
| GNDpin 2 | Connected to: GND 86% | — |
| VOpin 3 | Connected to: 3.3V 91% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MBO by shanteacontrols, Musicboard by julbouln, Rc fabgl by PickledDog and Narrowband-SDR by BillyWoods.
The MCP1825S in open source designs
The gallery holds 25 open source boards using the MCP1825S from 22 GitHub repositories; a typical one measures about 99.1 × 73.1 mm and carries around 74 components.
72% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is MBO by shanteacontrols.
Parts used alongside the MCP1825S
Microcontrollers on boards using the MCP1825S
What boards using the MCP1825S are built for
MCP1825S: common questions
Where can I find a MCP1825S reference design?
Each of the 25 boards on this page is a real design using the MCP1825S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1825S VI pin?
The VI pin has a decoupling capacitor on 18 of 22 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the MCP1825S.
What decoupling capacitors do designs use on the MCP1825S VO pin?
The VO pin has a decoupling capacitor on 16 of 22 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 22 open source designs using the MCP1825S.
What parts are used alongside the MCP1825S?
The AT24CS32-STUM, LM2594M-5.0, PESD2CAN, SN65HVD230 and STM32L432KCUx appear in the most repositories here.
Which microcontrollers do boards using the MCP1825S use?
Most are built on STM32 (9), AVR/Arduino (4), ESP32 (4) and PIC (1).
How big is a typical board using the MCP1825S?
The median is 99.1 × 73.1 mm, and 72% are two-layer designs.
What is the most popular open source board using the MCP1825S?
By GitHub stars, MBO by shanteacontrols, with 956 stars.
Can I simulate one of these boards using the MCP1825S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.