Pattern Ident v2
About the Pattern Ident v2 PCB
Pattern Ident v2 is an open source PCB design by TIGERs-Mannheim, published on GitHub under the Custom license license. It is a 2-layer board measuring 95 × 94 mm, with 69 components from 49 distinct parts.
Other key parts include the TCS34725 and TCA9548APW. By type, the board carries 9 resistors, 6 ICs, 6 capacitors, 5 LEDs and 1 crystal.
From the project
TIGERs Mannheim Open-Source Electronics
This repository contains electronics for our robots and our base station. There is one folder for each released version. Have a look at our 2020 ETDP which contains many details about design decisions and lessons learned over the last 10 years.
The following files are present for each release.
Main components on the Pattern Ident v2
Pattern Ident v2 bill of materials (BOM)
69 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | TCS34725 | DFN6 | IC1, IC2, IC3, IC4, IC5 |
| 1 | TCA9548APW | TSSOP24 | IC6 |
| 1 | — | TE-84952-8 | X1 |
| 1 | — | dummyfp0 | UNK_HOLE_0 |
| 1 | — | dummyfp1 | UNK_HOLE_1 |
| 1 | — | dummyfp2 | UNK_HOLE_2 |
| 1 | — | dummyfp3 | UNK_HOLE_3 |
| 1 | — | dummyfp4 | UNK_HOLE_4 |
| 1 | — | dummyfp5 | UNK_HOLE_5 |
| 1 | — | dummyfp6 | UNK_HOLE_6 |
| 1 | — | dummyfp7 | UNK_HOLE_7 |
| 1 | — | dummyfp8 | UNK_HOLE_8 |
| 1 | — | dummyfp9 | UNK_HOLE_9 |
| 1 | — | dummyfp10 | UNK_HOLE_10 |
| 1 | — | dummyfp11 | UNK_HOLE_11 |
| 1 | — | dummyfp12 | UNK_HOLE_12 |
| 1 | — | dummyfp13 | UNK_HOLE_13 |
| 1 | — | dummyfp14 | UNK_HOLE_14 |
| 1 | — | dummyfp15 | UNK_HOLE_15 |
| 1 | — | dummyfp16 | UNK_HOLE_16 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | dummyfp17 | UNK_HOLE_17 |
| 1 | — | dummyfp18 | UNK_HOLE_18 |
| 1 | — | dummyfp19 | UNK_HOLE_19 |
| 1 | — | dummyfp20 | UNK_HOLE_20 |
| 1 | — | dummyfp21 | UNK_HOLE_21 |
| 1 | — | dummyfp22 | UNK_HOLE_22 |
| 1 | — | dummyfp23 | UNK_HOLE_23 |
| 1 | — | dummyfp24 | UNK_HOLE_24 |
| 1 | — | dummyfp25 | UNK_HOLE_25 |
| 1 | — | dummyfp26 | UNK_HOLE_26 |
| 1 | — | dummyfp27 | UNK_HOLE_27 |
| 1 | — | dummyfp28 | UNK_HOLE_28 |
| 1 | — | dummyfp29 | UNK_HOLE_29 |
| 1 | — | dummyfp30 | UNK_HOLE_30 |
| 1 | — | dummyfp31 | UNK_HOLE_31 |
| 1 | — | dummyfp32 | UNK_HOLE_32 |
| 1 | — | dummyfp33 | UNK_HOLE_33 |
| 1 | — | dummyfp34 | UNK_HOLE_34 |
| 1 | — | dummyfp35 | UNK_HOLE_35 |
| 1 | — | dummyfp36 | UNK_HOLE_36 |
| 1 | — | dummyfp37 | UNK_HOLE_37 |
| 1 | — | dummyfp38 | UNK_HOLE_38 |
| 1 | — | dummyfp39 | UNK_HOLE_39 |
| 1 | — | dummyfp40 | UNK_HOLE_40 |
| 1 | — | dummyfp41 | UNK_HOLE_41 |
| 5 | wh | CHIPLED_1206_259 | LED1, LED2, LED3, LED4, LED5 |
| 6 | 100n | C0603_334 | C1, C2, C3, C4, C5, C6 |
| 5 | 100 | R0603_334 | R1, R2, R3, R4, R5 |
| 4 | 10k | EXB28V_342 | RN1, RN2, RN3, RN4 |
Pattern Ident v2 design files
The KiCad project lives in the TIGERs-Mannheim/electronics repository on GitHub; these links point at the commit this page was built from.
Pattern Ident v2: common questions
How big is the Pattern Ident v2 PCB?
The Pattern Ident v2 measures 95 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pattern Ident v2?
69 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pattern Ident v2 design files?
From the TIGERs-Mannheim/electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pattern Ident v2 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in electronics
Powerboard v1
90 × 80 mm372 parts4LCustom license9
STM32Base Station v3b
58 × 85 mm130 parts4LCustom license9
STM32Mainboard v13
80 × 85 mm118 parts4LCustom license9
STM32IR Controller v2
90 × 41 mm107 parts2LCustom license9
Kicking Device v13b
140 × 85 mm71 parts2LCustom license9
Front LEDs v1b
82 × 14 mm25 parts2LCustom license9
Encoder iC-PX v1b
15 × 17 mm12 parts2LCustom license9
Ball Detection v4
10 × 51 mm9 parts2LCustom license9