Ball Detection v4
About the Ball Detection v4 PCB
Ball Detection v4 is an open source PCB design by TIGERs-Mannheim, published on GitHub under the Custom license license. It is a 2-layer board measuring 10 × 51 mm, with 9 components from 9 distinct parts.
Other key parts include the OPA320. By type, the board carries 2 diodes, 2 capacitors, 1 IC and 1 resistor.
From the project
TIGERs Mannheim Open-Source Electronics
This repository contains electronics for our robots and our base station. There is one folder for each released version. Have a look at our 2020 ETDP which contains many details about design decisions and lessons learned over the last 10 years.
The following files are present for each release.
Main components on the Ball Detection v4
Ball Detection v4 bill of materials (BOM)
9 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA320 | SOT23-5 | IC1 |
| 1 | — | dummyfp0 | UNK_HOLE_0 |
| 1 | — | dummyfp1 | UNK_HOLE_1 |
| 1 | — | dummyfp2 | UNK_HOLE_2 |
| 1 | VSMB2000X01 | LED-GULLR | D1 |
| 1 | TEMD1000 | LED-GULLR | D2 |
| 1 | 10p | C0603 | C1 |
| 1 | 10u | C0603 | C2 |
| 1 | 1M | R0603 | R1 |
Ball Detection v4 design files
The KiCad project lives in the TIGERs-Mannheim/electronics repository on GitHub; these links point at the commit this page was built from.
Ball Detection v4: common questions
How big is the Ball Detection v4 PCB?
The Ball Detection v4 measures 10 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ball Detection v4?
9 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ball Detection v4 design files?
From the TIGERs-Mannheim/electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ball Detection v4 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in electronics
Powerboard v1
90 × 80 mm372 parts4LCustom license9
STM32Base Station v3b
58 × 85 mm130 parts4LCustom license9
STM32Mainboard v13
80 × 85 mm118 parts4LCustom license9
STM32IR Controller v2
90 × 41 mm107 parts2LCustom license9
Kicking Device v13b
140 × 85 mm71 parts2LCustom license9
Pattern Ident v2
95 × 94 mm69 parts2LCustom license9
Front LEDs v1b
82 × 14 mm25 parts2LCustom license9
Encoder iC-PX v1b
15 × 17 mm12 parts2LCustom license9