Midi314

tiliosys·midi314-pcb

Midi314 PCB layout, top view — open source AVR/Arduino board by tiliosys

About the Midi314 PCB

Midi314 is an open source AVR/Arduino PCB design by tiliosys, published on GitHub under the MPL-2.0 license. It is a 2-layer board measuring 287 × 91.4 mm, with 90 components from 4 distinct parts.

Its main chip is the Arduino_Pro_Micro, from the AVR/Arduino family. By type, the board carries 42 switches, 42 diodes and 1 IC.

It belongs with the keyboards and audio designs in this gallery.

From the project

midi@3:14 - Home-made MIDI keyboard (printed circuit board)

midi@3:14 is a home-made electronic keyboard for playing music.

It has been designed with the following requirements:

Small size, light weight. Uniform layout. * Compatible with any computer hardware (PC, Raspberry Pi, …) and free software synthesizers.

As a result, midi@3:14 has the following characteristics:

Jankó layout with 3 rows of 14 keys. 5 potentiometers that can be used to change the volume, or any other control value supported by the MIDI standard. * A USB-MIDI interface.

Midi314, from the project README
From the project README

Main components on the Midi314

Midi314 bill of materials (BOM)

90 components, 4 distinct parts.

QtyPartRefs
1
Arduino_Pro_Micro
U1
5
POT
RV1, RV2, RV3, RV4, RV5
42
SW_Push
SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW21 +34
42
1N4148
D11, D12, D13, D14, D15, D16, D17, D21 +34

Midi314 design files

The KiCad project lives in the tiliosys/midi314-pcb repository on GitHub; these links point at the commit this page was built from.

Midi314: common questions

What microcontroller does the Midi314 use?

The Midi314 is built around the Arduino_Pro_Micro, from the AVR/Arduino family.

How big is the Midi314 PCB?

The Midi314 measures 287 × 91.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Midi314?

90 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Midi314 design files?

From the tiliosys/midi314-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Midi314 design in my own project?

Yes, under the terms of its MPL-2.0 license, which tiliosys chose for the repository.

Can I test firmware for the Midi314 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards