Schaltplan Ultraschallsensor
Tinkerforge·distance-us-v2-bricklet-techniker·hardware/Prototyp/Schaltplan_Ultraschallsensor/Schaltplan Ultraschallsensor.kicad_pcb
About the Schaltplan Ultraschallsensor PCB
Schaltplan Ultraschallsensor is an open source PCB design by Tinkerforge, published on GitHub. It is a 2-layer board measuring 43.5 × 46.9 mm, with 54 components from 37 distinct parts.
Other key parts include the A5950, XMC1XXX48, TLC272, LMR62014X and DRILL. By type, the board carries 16 capacitors, 14 resistors, 6 ICs, 5 diodes, 4 connectors and 3 inductors.
From the project
Distance US Bricklet 2.0 ========================
Distance US Bricklet 2.0 ========================
This Bricklet is currently in development.
This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators
software/: examples/: Examples for all supported languages build/: Compiled files src/: Source code of firmware Makefile: Makefile to build project
Main components on the Schaltplan Ultraschallsensor
Schaltplan Ultraschallsensor bill of materials (BOM)
54 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A5950 | 16-leadTSSOP_0,137,4,4mmBreite | IC1 |
| 1 | XMC1XXX48 | QFN48-EP2 | U1 |
| 1 | TLC272 | TSSOP8 | U2 |
| 1 | LMR62014X | SOT23-5 | U3 |
| 2 | DRILL | DRILL_NP | U5, U6 |
| 1 | CRYSTAL_3225 | CRYSTAL_3225 | X1 |
| 1 | CON-SENSOR2 | CON-SENSOR2 | P1 |
| 1 | CONN_01X05 | pin_array_5x1 | P2 |
| 1 | CONN_01X01 | DEBUG_PAD | P3 |
| 1 | CONN_01X02 | SolderJumper | P4 |
| 1 | Ultraschall Sender/Empränger | Ultraschallsensor | LS1 |
| 1 | 10k | 0603X4 | RP1 |
| 1 | 1k | 0603X4 | RP2 |
| 1 | 82 | 4X0402 | RP3 |
| 1 | 200k | ST4ETA | RV1 |
| 1 | B0520LW | SOD-123 | D1 |
| 1 | ZENER | SOD-123 | D2 |
| 2 | Gelb | D0603E | D3, D5 |
| 1 | Gleb | D0603E | D4 |
| 2 | FB | C0603F | L1, L3 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uH | NR3030 | L2 |
| 5 | 100nF | C0603F | C1, C3, C4, C11, C16 |
| 1 | 220nF | C0603F | C2 |
| 4 | 4.7uF | C0805 | C5, C6, C7, C8 |
| 1 | 270pF | C0603F | C9 |
| 1 | 4.7nF | C0603F | C10 |
| 1 | 40pF | C0603F | C12 |
| 2 | 10pF | C0603F | C13, C14 |
| 1 | 220pF | C0402F | C15 |
| 1 | 13.3k | R0603F | R2 |
| 1 | 1M | R0603F | R3 |
| 4 | 20k | R0603F | R4, R11, R12, R13 |
| 3 | 100k | R0603F | R5, R7, R10 |
| 1 | 10 | R0603F | R6 |
| 1 | 50k | ST4ETA | R8 |
| 1 | 120k | R0603F | R9 |
| 2 | 0 | R0603F | R17, R18 |
Schaltplan Ultraschallsensor design files
The KiCad project lives in the Tinkerforge/distance-us-v2-bricklet-techniker repository on GitHub; these links point at the commit this page was built from.
Schaltplan Ultraschallsensor: common questions
How big is the Schaltplan Ultraschallsensor PCB?
The Schaltplan Ultraschallsensor measures 43.5 × 46.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Schaltplan Ultraschallsensor?
54 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Schaltplan Ultraschallsensor design files?
From the Tinkerforge/distance-us-v2-bricklet-techniker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Schaltplan Ultraschallsensor design in my own project?
The repository has no license, so all rights stay with Tinkerforge. Use it as a reference, and ask the author before reusing the design.