Ultraschallsensor
Tinkerforge·distance-us-v2-bricklet-techniker·hardware/Prototyp/Board_V2/Ultraschallsensor.kicad_pcb
About the Ultraschallsensor PCB
Ultraschallsensor is an open source PCB design by Tinkerforge, published on GitHub. It is a 2-layer board measuring 49.5 × 38.1 mm, with 64 components from 44 distinct parts.
Other key parts include the TLC272, LMR62014X, XMC1XXX48 and DRILL. By type, the board carries 18 resistors, 16 capacitors, 11 connectors, 5 ICs, 3 transistors and 3 diodes.
From the project
Distance US Bricklet 2.0 ========================
Distance US Bricklet 2.0 ========================
This Bricklet is currently in development.
This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators
software/: examples/: Examples for all supported languages build/: Compiled files src/: Source code of firmware Makefile: Makefile to build project
Main components on the Ultraschallsensor
Ultraschallsensor bill of materials (BOM)
64 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLC272 | TSSOP8 | U1 |
| 1 | LMR62014X | SOT23-5 | U2 |
| 1 | XMC1XXX48 | QFN48-EP2 | U3 |
| 2 | DRILL | DRILL_NP | U4, U5 |
| 2 | MOSFET_N_CH | SOT23GDS | Q1, Q2 |
| 1 | DMG6602SVT-7DICT-ND | SOT23-6 | Q3 |
| 1 | CRYSTAL_3225 | CRYSTAL_3225 | X1 |
| 1 | Conn_01x02 | SolderJumper | J1 |
| 1 | CON-SENSOR2 | CON-SENSOR2 | P0 |
| 1 | CONN_01X01 | CONN_1 | P1 |
| 1 | MP-GND | CONN_1 | P2 |
| 1 | MP-Sensor- | DEBUG_PAD | P3 |
| 1 | MP-Sensor+ | DEBUG_PAD | P4 |
| 1 | MP-PWM-1 | DEBUG_PAD | P5 |
| 1 | MP-PWM-2 | DEBUG_PAD | P6 |
| 1 | MP-OPV-AUS | CONN_1 | P7 |
| 1 | MP-OPV-ZK | CONN_1 | P8 |
| 1 | MP-+UA | CONN_1 | P9 |
| 1 | Speaker_Ultrasound | PIN_ARRAY_2X1 | LS1 |
| 1 | R_PACK4 | 4X0402 | RP1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 50k | ST4 | RV1 |
| 1 | 200k | ST4 | RV2 |
| 1 | ZENER | SOD-123 | D1 |
| 1 | DIODESCH | SOD-123 | D2 |
| 1 | LED | D0603E | D3 |
| 2 | FB | C0603F | L1, L3 |
| 1 | 10uH | NR3030 | L2 |
| 4 | 4.7uF | C0805 | C1, C3, C12, C13 |
| 6 | 100nF | C0603F | C2, C4, C7, C8, C9, C10 |
| 1 | 4.7nF | C0603F | C5 |
| 1 | 270pF | C0603F | C6 |
| 1 | 220nF | C0603F | C11 |
| 1 | 220pF | C0402F | C14 |
| 2 | 10pF | C0603F | C15, C16 |
| 4 | 20k | R0603F | R1, R6, R10, R11 |
| 3 | 100k | R0603F | R2, R3, R8 |
| 1 | 1M | R0603F | R4 |
| 1 | 10 | R0603F | R5 |
| 1 | 13.3k | R0603F | R7 |
| 1 | 120k | R0603F | R9 |
| 1 | 1k | R0603F | R14 |
| 2 | 1k | 1206E | R21, R22 |
| 2 | 10k | R0603F | R23, R24 |
| 2 | 0 | R0603F | R30, R31 |
Ultraschallsensor design files
The KiCad project lives in the Tinkerforge/distance-us-v2-bricklet-techniker repository on GitHub; these links point at the commit this page was built from.
Ultraschallsensor: common questions
How big is the Ultraschallsensor PCB?
The Ultraschallsensor measures 49.5 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ultraschallsensor?
64 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ultraschallsensor design files?
From the Tinkerforge/distance-us-v2-bricklet-techniker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ultraschallsensor design in my own project?
The repository has no license, so all rights stay with Tinkerforge. Use it as a reference, and ask the author before reusing the design.