Warp energy manager bricklet
About the Warp energy manager bricklet PCB
Warp energy manager bricklet is an open source PCB design by Tinkerforge, published on GitHub. It is a 4-layer board measuring 68 × 87 mm, with 100 components from 58 distinct parts.
Other key parts include the XMC1404, DMMT5401, AQH3213AX, HCPL2731 and TPS70933DBVR. By type, the board carries 28 capacitors, 25 resistors, 10 connectors, 8 ICs, 7 diodes and 4 modules.
From the project
This Bricklet together with the ESP32 Ethernet Brick form the hardware used in the WARP Energy Manager
WARP Energy Manager Bricklet ============================
This Bricklet together with the ESP32 Ethernet Brick form the hardware used in the WARP Energy Manager.
See https://www.warp-charger.com/energy-manager.html for more details
This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators
Main components on the Warp energy manager bricklet
Warp energy manager bricklet bill of materials (BOM)
100 components, 58 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XMC1404 | QFN48-EP2 | U101 |
| 1 | DMMT5401 | SOT26 | U103 |
| 1 | AQH3213AX | AQ-H | U108 |
| 1 | HCPL2731 | DIP-8 | U109 |
| 1 | TPS70933DBVR | SOT23-5 | U110 |
| 1 | IRM02-12 | IRM02 | U111 |
| 1 | WPMDL110 | WPMDL110 | U112 |
| 1 | SP3491 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U113 |
| 4 | DRILL | DRILL_NP_35 | A101, A102, A103, A104 |
| 1 | SI2305CDS-T1-GE3 | SOT23GDS | Q102 |
| 1 | 2N7002P | SOT23GDS | Q103 |
| 1 | SSM3J355R,LF | SOT23GDS | Q105 |
| 1 | 16MHz | CRYSTAL_3225 | X101 |
| 1 | 32.768kHz | AB26TRQ | X102 |
| 1 | Boot | SolderJumper | J101 |
| 1 | DM3CS | SD-Card-DM3CS | J102 |
| 1 | CON-SENSOR2 | CON-SENSOR2_180 | P101 |
| 1 | Relay | OQ_2P_5mm_230V | P102 |
| 1 | L+N | OQ_2P_5mm_230V | P103 |
| 1 | OUT | OQ_2P | P104 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INPUT | OQ_4P | P105 |
| 1 | DNP | JST-PH-3-THT | P106 |
| 1 | MODBUS | OQ_4P | P110 |
| 1 | Debug | DEBUG_PAD | P111 |
| 2 | FUSE | Fuse-Holder-5x20 | F101, F102 |
| 2 | PTC 0.45A | R1206E | PTC101, PTC102 |
| 1 | AGQ200S12Z | AGQ2X0 | REL101 |
| 2 | 82 | 4X0402 | RP101, RP103 |
| 1 | 10k | 0603X4 | RP102 |
| 1 | 10k | 4X0603 | RP105 |
| 1 | CLP6C-FKB-CK1P1G1BB7R3R3 | PLCC6-6x5 | D101 |
| 3 | SMAJ12CA | DO-214AC | D102, D106, D111 |
| 1 | blue | D0603F | D103 |
| 2 | B0520LW-7 | SOD-123 | D105, D107 |
| 3 | FB | R0603F | L101, L102, L103 |
| 1 | WE-SL | WE-SL | L104 |
| 1 | 220pF | C0402F | C101 |
| 10 | 100nF | C0603F | C102, C104, C107, C112, C113, C114, C117, C127 +2 |
| 5 | 1uF | C0603F | C103, C106, C124, C125, C126 |
| 2 | 4.7uF/50V | C1206 | C105, C115 |
| 2 | 100uF | ELKO_63 | C108, C109 |
| 1 | 2.2uF | C0603F | C110 |
| 2 | 100uF | C1210 | C111, C116 |
| 2 | 15pF | C0603F | C118, C119 |
| 2 | 10pF | C0603F | C128, C129 |
| 1 | 220nF | C0603F | C131 |
| 2 | 51 | R0603F | R101, R102 |
| 1 | 100 | R0603F | R103 |
| 6 | 1k | R1206E | R104, R105, R111, R112, R116, R117 |
| 3 | 10k | R0603F | R106, R109, R140 |
| 1 | 300k | R0603F | R107 |
| 1 | 100k | R0603F | R108 |
| 2 | MOV-10D391KTR | VAR_10mm | R113, R128 |
| 2 | 120 | R0805E | R114, R137 |
| 3 | 1k | R0603F | R115, R118, R124 |
| 1 | 47k | R0603F | R133 |
| 2 | 750 | R0603F | R134, R136 |
| 1 | DNP | R0603F | R135 |
Warp energy manager bricklet design files
The KiCad project lives in the Tinkerforge/warp-energy-manager-bricklet repository on GitHub; these links point at the commit this page was built from.
Warp energy manager bricklet: common questions
How big is the Warp energy manager bricklet PCB?
The Warp energy manager bricklet measures 68 × 87 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Warp energy manager bricklet?
100 components, from 58 distinct parts. The full bill of materials is listed on this page.
Where can I download the Warp energy manager bricklet design files?
From the Tinkerforge/warp-energy-manager-bricklet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Warp energy manager bricklet design in my own project?
The repository has no license, so all rights stay with Tinkerforge. Use it as a reference, and ask the author before reusing the design.