Micro-Console
Tiogaplanet·Micro-Console·Console/Console.kicad_pcb
About the Micro-Console PCB
Micro-Console is an open source AVR/Arduino PCB design by Tiogaplanet, published on GitHub. It is a 2-layer board measuring 76.2 × 58.4 mm, with 13 components from 6 distinct parts.
Its main chip is the Arduino_Micro_Socket, from the AVR/Arduino family. By type, the board carries 6 switches, 3 resistors, 1 speaker, 1 LED and 1 diode.
It belongs with the displays & leds designs in this gallery.
From the project
An Arduboy clone. I can't think of a witty name.
Micro-Console bill of materials (BOM)
13 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Speaker | Buzzer_D14mm_H7mm_P10mm | LS1 |
| 6 | B3F-1000 | Switch_Tactile_THT_B3F-1xxx | S1, S2, S3, S4, S7, S8 |
| 1 | Arduino_Micro_Socket | Arduino_Micro_Socket | XA1 |
| 1 | SSD1306-SPI | 128x64-OLED-SPI | Brd1 |
| 1 | LED_RGBA | LED_BL-FL7680RGB | D1 |
| 3 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
Micro-Console design files
The KiCad project lives in the Tiogaplanet/Micro-Console repository on GitHub; these links point at the commit this page was built from.
Micro-Console: common questions
What microcontroller does the Micro-Console use?
The Micro-Console is built around the Arduino_Micro_Socket, from the AVR/Arduino family.
How big is the Micro-Console PCB?
The Micro-Console measures 76.2 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Micro-Console?
13 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Micro-Console design files?
From the Tiogaplanet/Micro-Console repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Micro-Console design in my own project?
The repository has no license, so all rights stay with Tiogaplanet. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Micro-Console without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k