Jetson rtc
tmcit-ararobo-2026a·jetson-interface-board·jetson-rtc/jetson-rtc.kicad_pcb
About the Jetson rtc PCB
Jetson rtc is an open source PCB design by tmcit-ararobo-2026a, published on GitHub under the MIT license. It is a 2-layer board measuring 13 × 52 mm, with 11 components from 8 distinct parts.
Other key parts include the DS3231MZ. By type, the board carries 3 capacitors, 2 connectors, 2 diodes, 2 resistors, 1 IC and 1 switch.
From the project
Jetsonのヘッダーに取り付けてCANトランシーバーやデバッグ用USBポートを搭載する基板
Jetson Orin Nano (Super)のbutton headerやGPIOに接続してCAN通信やUSB type-Cによるシリアルコンソールアクセス、RTCクロック(DS3231)の接続を可能にする基板
1. 概要 2. ドキュメント 3. ビルド・使い方 4. システム構成 5. ライセンス
Jetson Orin Nano Developer Packには多様なインターフェイスが接続可能であるが、CAN通信やシリアルコンソール、RTCクロックなどの接続には外部の追加回路が必要となる。 追加回路をジャンパー線などで簡易的に作成することも可能だが、安定性に懸念がある。 そこで、基板を作成した。
Main components on the Jetson rtc
Jetson rtc bill of materials (BOM)
11 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS3231MZ | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | CONN_01X04 Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | CONN_02X20_ODD_EVEN Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | SW_Push | switch_TVAF06-A020B-R | SW1 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 2 | 0.1U 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | CR2032 | CH243-2032LF | C3 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
Jetson rtc design files
The KiCad project lives in the tmcit-ararobo-2026a/jetson-interface-board repository on GitHub; these links point at the commit this page was built from.
Jetson rtc: common questions
How big is the Jetson rtc PCB?
The Jetson rtc measures 13 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jetson rtc?
11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jetson rtc design files?
From the tmcit-ararobo-2026a/jetson-interface-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jetson rtc design in my own project?
Yes, under the terms of its MIT license, which tmcit-ararobo-2026a chose for the repository.