Jetson interface board
tmcit-ararobo-2026a·jetson-interface-board·jetson-interface-board/jetson-interface-board.kicad_pcb
About the Jetson interface board
Jetson interface board is an open source PCB design by tmcit-ararobo-2026a, published on GitHub under the MIT license. It is a 2-layer board measuring 63 × 23 mm, with 33 components from 17 distinct parts.
Other key parts include the MCP2562-E-MF, FT234XD and XC8111AA01MR-G. By type, the board carries 10 resistors, 8 capacitors, 6 diodes, 5 connectors, 3 ICs and 1 jumper.
From the project
Jetsonのヘッダーに取り付けてCANトランシーバーやデバッグ用USBポートを搭載する基板
Jetson Orin Nano (Super)のbutton headerやGPIOに接続してCAN通信やUSB type-Cによるシリアルコンソールアクセス、RTCクロック(DS3231)の接続を可能にする基板
1. 概要 2. ドキュメント 3. ビルド・使い方 4. システム構成 5. ライセンス
Jetson Orin Nano Developer Packには多様なインターフェイスが接続可能であるが、CAN通信やシリアルコンソール、RTCクロックなどの接続には外部の追加回路が必要となる。 追加回路をジャンパー線などで簡易的に作成することも可能だが、安定性に懸念がある。 そこで、基板を作成した。
Main components on the Jetson interface board
Jetson interface board bill of materials (BOM)
33 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2562-E-MF | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U1 |
| 1 | FT234XD | WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm | U2 |
| 1 | XC8111AA01MR-G | SOT-23-5 | U3 |
| 2 | CONN_01X04 Conn_01x04 | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J1, J2 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | CONN_01X04 Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | CONN_01X18 Conn_01x18 | PinSocket_1x18_P2.54mm_Horizontal | J5 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 6 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6 |
| 3 | 0.1UF 0.1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4 |
| 2 | 0.1U 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C7 |
| 1 | 4.7UF 4.7uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 2 | 1UF 1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9 |
| 1 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 6 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6, R7, R8, R9, R10 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
Jetson interface board design files
The KiCad project lives in the tmcit-ararobo-2026a/jetson-interface-board repository on GitHub; these links point at the commit this page was built from.
Jetson interface board: common questions
How big is the Jetson interface board?
The Jetson interface board measures 63 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jetson interface board?
33 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jetson interface board design files?
From the tmcit-ararobo-2026a/jetson-interface-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jetson interface board design in my own project?
Yes, under the terms of its MIT license, which tmcit-ararobo-2026a chose for the repository.