82 open source boards using the DS3231MZ

Real designs built with the DS3231MZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

82 boardsClear filters|Most starred

How designs wire the DS3231MZ

Read from the KiCad layouts of 67 open source designs, one per repository: what each pin of the DS3231MZ connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a pull-up to 3.3V on 54 of 66 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SCL pin has a pull-up to 3.3V on 54 of 66 designs, most often 4.7 kΩ (then 10 kΩ).
  • The 32KHZ pin is left unconnected on 54 of 67 designs (GND on 2, a signal on 10).
  • The VCC pin has a decoupling capacitor on 43 of 67 designs, most often 100 nF (then 1 µF).
32KHZpin 1Connected to: Not connected 81%
VCCpin 2Connected to: 3.3V 91%
  • Decoupling capacitor on 64% · 100 nF (48), 1 µF (4), 10 nF (1)
INT/SQWpin 3Connected to: Not connected 55% · a signal 45%
  • Pull-up to 3.3V on 31% · 10 kΩ (10), 2.2 kΩ (5), 4.7 kΩ (2)
RSTpin 4Connected to: Not connected 76% · a signal 16%
GNDpin 5Connected to: GND 91%
SDApin 7Connected to: The microcontroller 50%, a connector 41%
  • Pull-up to 3.3V on 82% · 4.7 kΩ (27), 10 kΩ (12), 1 kΩ (5)
SCLpin 8Connected to: The microcontroller 50%, a connector 41%
  • Pull-up to 3.3V on 82% · 4.7 kΩ (27), 10 kΩ (12), 1 kΩ (5)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Board latest by dennisss, Open smartwatch light by Open-Smartwatch, Open smartwatch gps by Open-Smartwatch and Frank next by rh1tech.

The DS3231MZ in open source designs

The gallery holds 82 open source boards using the DS3231MZ from 68 GitHub repositories; a typical one measures about 90 × 60 mm and carries around 79 components.

62% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is Board latest by dennisss.

Microcontrollers on boards using the DS3231MZ

DS3231MZ: common questions

Where can I find a DS3231MZ reference design?

Each of the 82 boards on this page is a real design using the DS3231MZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the DS3231MZ SDA pin?

The SDA pin has a pull-up to 3.3V on 54 of 66 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 67 open source designs using the DS3231MZ.

What pull-up resistor is used on the DS3231MZ SCL pin?

The SCL pin has a pull-up to 3.3V on 54 of 66 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 67 open source designs using the DS3231MZ.

How is the DS3231MZ 32KHZ pin connected?

The 32KHZ pin is left unconnected on 54 of 67 designs (GND on 2, a signal on 10). Counted from the KiCad layouts of 67 open source designs using the DS3231MZ.

What parts are used alongside the DS3231MZ?

The USBLC6-2SC6, AMS1117-3.3, ESP32-S3-WROOM-1, RP2040 and CH340E appear in the most repositories here.

Which microcontrollers do boards using the DS3231MZ use?

Most are built on ESP32 (18), RP2040/RP2350 (16), AVR/Arduino (13) and STM32 (6).

How big is a typical board using the DS3231MZ?

The median is 90 × 60 mm, and 62% are two-layer designs.

What is the most popular open source board using the DS3231MZ?

By GitHub stars, Board latest by dennisss, with 381 stars.

Can I simulate one of these boards using the DS3231MZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part