HardLabs

Raspi3 debug board

tnishinaga·seccamp2021_pcb·raspi_jtag_debug_board/raspi3_debug_board.kicad_pcb

Raspi3 debug board layout, top view — open source Raspberry Pi board by tnishinaga

About the Raspi3 debug board

Raspi3 debug board is an open source Raspberry Pi PCB design by tnishinaga, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 6 components from 6 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. By type, the board carries 4 connectors, 1 diode and 1 resistor.

Raspi3 debug board bill of materials (BOM)

6 components, 6 distinct parts.

QtyPartRefs
1
Conn_01x06_Male
J1
1
Conn_ARM_JTAG_SWD_20
J2
1
Raspberry_Pi_2_3
J3
1
Grove_UART
J8
1
LED
D1
1
1k
R1

Raspi3 debug board design files

The KiCad project lives in the tnishinaga/seccamp2021_pcb repository on GitHub; these links point at the commit this page was built from.

Raspi3 debug board: common questions

What microcontroller does the Raspi3 debug board use?

The Raspi3 debug board is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the Raspi3 debug board?

The Raspi3 debug board measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Raspi3 debug board?

6 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Raspi3 debug board design files?

From the tnishinaga/seccamp2021_pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Raspi3 debug board design in my own project?

The repository has no license, so all rights stay with tnishinaga. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Raspi3 debug board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in seccamp2021_pcb

Similar boards