Inline-868-filter for-Mesh nodes
Tomas-Kuchta-FPV·Inline-868-filter-for-Mesh-nodes·PCB/Inline-868-filter/Inline-868-filter.kicad_pcb
About the Inline-868-filter for-Mesh nodes PCB
Inline-868-filter for-Mesh nodes is an open source PCB design by Tomas-Kuchta-FPV, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 24 × 37 mm, with 10 components from 4 distinct parts.
By type, the board carries 6 connectors and 4 crystals.
It belongs with the rf & radio designs in this gallery.
From the project
Project that aimes to make a low as possible insertion loss from reducing BOM. It has a ufl -> PCB (SAW filter SMA connector) -> antenna
This repo contains three boards in a pannel with experimental filter selection for Mesh nodes. Think MeshTastic and Mesh Core.
There is a classic filter tested by the comunity and there is as quater wave stub that is super experimentral and I don't think it will be tuned. But let's see.
This idea roze from building a router that will go into a noisy enviroment with numerous lightning strikes. And I took inpiration from a build from rdx in our Czech comunity.

Inline-868-filter for-Mesh nodes bill of materials (BOM)
10 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | HDF868.3A1-S6 | Filter_SAW_Epcos_DCC6C_3x3mm | X1, X2 |
| 2 | 869.432MHZ 869.432MHz | Quater-Wave Stub at 869.432MHz | X3, X4 |
| 3 | u.fl | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1, J3, J5 |
| 3 | SMA | SMA_Amphenol_132291_Vertical | J2, J4, J6 |
Inline-868-filter for-Mesh nodes design files
The KiCad project lives in the Tomas-Kuchta-FPV/Inline-868-filter-for-Mesh-nodes repository on GitHub; these links point at the commit this page was built from.
Inline-868-filter for-Mesh nodes: common questions
How big is the Inline-868-filter for-Mesh nodes PCB?
The Inline-868-filter for-Mesh nodes measures 24 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Inline-868-filter for-Mesh nodes?
10 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Inline-868-filter for-Mesh nodes design files?
From the Tomas-Kuchta-FPV/Inline-868-filter-for-Mesh-nodes repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Inline-868-filter for-Mesh nodes design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which Tomas-Kuchta-FPV chose for the repository.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568