1stLayer Power
Tomoshibi-technology·MovingDisplay3-Circuit·circuits/Imposition/1stLayer_Power/1stLayer_Power.kicad_pcb
About the 1stLayer Power PCB
1stLayer Power is an open source PCB design by Tomoshibi-technology, published on GitHub. It is a 2-layer board measuring 62.9 × 90.7 mm, with 51 components from 19 distinct parts.
By type, the board carries 11 connectors, 8 resistors, 3 transistors, 3 capacitors, 2 test points and 2 diodes.
1stLayer Power bill of materials (BOM)
51 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N7002 | SOT-23 | Q1 |
| 2 | SQS141ELNW | Package_TSON-Advance | Q4, Q6 |
| 3 | Conn_01x14_Pin | BoxHeader_2x07_P1.27mm_Horizontal | J1, J2, J3 |
| 1 | Conn_01x02_Male | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J4 |
| 4 | Conn_01x02_Male | Molex_SPOX_5267-02A_1x02_P2.50mm_Vertical | J5, J6, J8, J9 |
| 2 | Conn_01x08_MountingPin | Molex_PicoBlade_53398-0871_1x08-1MP_P1.25mm_Vertical | J7, J10 |
| 1 | Conn_01x10_Socket | PinSocket_1x10_P1.27mm_Vertical | J11 |
| 1 | Fuse | Fuseholder_Blade_Mini_Keystone_3568 | F2 |
| 4 | MountingHole_Pad | Pad_THTPad_1.0x1.0mm_Drill0.65mm | H3, H11, H19, H21 |
| 16 | MountingHole_Pad | Pad_THTPad_D1.0mm_Drill0.65mm | H4, H5, H6, H7, H8, H9, H10, H12 +8 |
| 1 | SW_SPDT | SW_Slide_DPDT_SS22F06G5-G | SW1 |
| 2 | TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2 |
| 1 | 1N5819WS | D_SOD-323_HandSoldering | D2 |
| 1 | Green | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 2 | 330uF | C_Elec_8x10.2 | C1, C4 |
| 1 | 1uF | C_0603_1608Metric | C3 |
| 1 | 100k | R_0603_1608Metric | R3 |
| 6 | 10k | R_0603_1608Metric | R5, R6, R7, R8, R9, R10 |
| 1 | 20k | R_0603_1608Metric | R11 |
1stLayer Power design files
The KiCad project lives in the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub; these links point at the commit this page was built from.
1stLayer Power: common questions
How big is the 1stLayer Power PCB?
The 1stLayer Power measures 62.9 × 90.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1stLayer Power?
51 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the 1stLayer Power design files?
From the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 1stLayer Power design in my own project?
The repository has no license, so all rights stay with Tomoshibi-technology. Use it as a reference, and ask the author before reusing the design.
More boards in MovingDisplay3-Circuit
STM32
RasPi
Tomoshibi-technology
90 × 57 mm270 parts4LNo license0STM32
Drive
Tomoshibi-technology
102.2 × 125.7 mm139 parts2LNo license0STM32
2ndLayer 3rdLayer
Tomoshibi-technology
53.9 × 71.7 mm137 parts2LNo license0DCDC
Tomoshibi-technology
100 × 100 mm85 parts2LNo license0Control
Tomoshibi-technology
35 × 35 mm74 parts4LNo license0MD
Tomoshibi-technology
35 × 35 mm28 parts4LNo license0