2ndLayer 3rdLayer
Tomoshibi-technology·MovingDisplay3-Circuit·circuits/Imposition/2ndLayer_3rdLayer/2ndLayer_3rdLayer.kicad_pcb
About the 2ndLayer 3rdLayer PCB
2ndLayer 3rdLayer is an open source STM32 PCB design by Tomoshibi-technology, published on GitHub. It is a 2-layer board measuring 53.9 × 71.7 mm, with 137 components from 34 distinct parts.
Its main chip is the STM32H723VGTx, from the STM32 family. Other key parts include the DCDC_TPSM336x5 and MAX3485. By type, the board carries 74 resistors, 37 capacitors, 14 transistors, 6 ICs, 4 diodes and 1 crystal.
Main components on the 2ndLayer 3rdLayer
2ndLayer 3rdLayer bill of materials (BOM)
137 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DCDC_TPSM336x5 | DCDC_TPSM336x5 | U1 |
| 4 | MAX3485 | SOP-8_3.9x4.9mm_P1.27mm | U3, U4, U5, U6 |
| 1 | STM32H723VGTx | LQFP-100_14x14mm_P0.5mm | U8 |
| 4 | SSM3J332R | SOT-23W | Q1, Q3, Q11, Q17 |
| 4 | S8550 | SC-59 | Q2, Q4, Q10, Q12 |
| 2 | 2N7002 | SC-59 | Q8, Q18 |
| 2 | S8550 | SOT-23 | Q13, Q14 |
| 2 | 2N7002 | SOT-23 | Q15, Q16 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J4 |
| 4 | 1N5819WS | Diode_SOD-323 | D1, D4, D6, D17 |
| 18 | 0.1uF | C_0402_1005Metric | C1, C2, C3, C6, C7, C8, C11, C12 +10 |
| 2 | 22pF | C_0603_1608Metric | C4, C5 |
| 1 | 10uF | C_1206_3216Metric | C9 |
| 2 | 22uF | C_0805_2012Metric | C10, C32 |
| 1 | ADJ_ST | C_0603_1608Metric | C13 |
| 6 | 1uF | C_0402_1005Metric | C15, C16, C17, C27, C29, C33 |
| 1 | 0.1uF | C_0603_1608Metric | C22 |
| 1 | 4.7uF | C_0603_1608Metric | C25 |
| 2 | 2.2uF | C_0402_1005Metric | C30, C31 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | C_0805_2012Metric | C37 |
| 2 | 47pF | C_0603_1608Metric | C38, C39 |
| 10 | 1k | R_0402_1005Metric | R1, R6, R9, R33, R34, R35, R57, R58 +2 |
| 37 | 10k | R_0402_1005Metric | R2, R3, R7, R8, R10, R11, R12, R13 +29 |
| 2 | 7.5k | R_0603_1608Metric | R4, R48 |
| 3 | 20k | R_0402_1005Metric | R5, R49, R69 |
| 1 | 1k | R_0603_1608Metric | R30 |
| 1 | 75k | R_0603_1608Metric | R31 |
| 1 | 10k | R_0603_1608Metric | R32 |
| 8 | 2.2k | R_0402_1005Metric | R42, R43, R44, R45, R51, R52, R53, R54 |
| 4 | 120 | R_0402_1005Metric | R46, R47, R55, R56 |
| 3 | 5.1k | R_0402_1005Metric | R72, R78, R79 |
| 2 | PullUP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R74, R75 |
| 2 | 33 | R_0603_1608Metric | R76, R77 |
2ndLayer 3rdLayer design files
The KiCad project lives in the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub; these links point at the commit this page was built from.
2ndLayer 3rdLayer: common questions
What microcontroller does the 2ndLayer 3rdLayer use?
The 2ndLayer 3rdLayer is built around the STM32H723VGTx, from the STM32 family.
How big is the 2ndLayer 3rdLayer PCB?
The 2ndLayer 3rdLayer measures 53.9 × 71.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2ndLayer 3rdLayer?
137 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2ndLayer 3rdLayer design files?
From the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2ndLayer 3rdLayer design in my own project?
The repository has no license, so all rights stay with Tomoshibi-technology. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2ndLayer 3rdLayer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in MovingDisplay3-Circuit
STM32
RasPi
Tomoshibi-technology
90 × 57 mm270 parts4LNo license0STM32
Drive
Tomoshibi-technology
102.2 × 125.7 mm139 parts2LNo license0DCDC
Tomoshibi-technology
100 × 100 mm85 parts2LNo license0Control
Tomoshibi-technology
35 × 35 mm74 parts4LNo license01stLayer Power
Tomoshibi-technology
62.9 × 90.7 mm51 parts2LNo license0MD
Tomoshibi-technology
35 × 35 mm28 parts4LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k