RasPi
Tomoshibi-technology·MovingDisplay3-Circuit·circuits/RasPi/RasPi.kicad_pcb
About the RasPi PCB
RasPi is an open source STM32 PCB design by Tomoshibi-technology, published on GitHub. It is a 4-layer board measuring 90 × 57 mm, with 270 components from 49 distinct parts.
Its main chip is the STM32H723VGTx, from the STM32 family. Other key parts include the MAX3485, TPS54560BDDA and DCDC_TPS61023. By type, the board carries 146 resistors, 69 capacitors, 35 transistors, 13 ICs, 4 diodes and 2 connectors.
Main components on the RasPi
RasPi bill of materials (BOM)
270 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | MAX3485 | SOP-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5, U8, U9, U10, U11 +2 |
| 1 | TPS54560BDDA | Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U13 |
| 1 | STM32H723VGTx | LQFP-100_14x14mm_P0.5mm | U15 |
| 1 | DCDC_TPS61023 | DCDC_TPS61023 | U19 |
| 6 | S8550 | SOT-23 | Q1, Q15, Q19, Q22, Q32, Q36 |
| 10 | S8550 | SC-59 | Q2, Q3, Q4, Q5, Q7, Q9, Q17, Q18 +2 |
| 7 | SSM3J332R | SOT-23W | Q6, Q8, Q16, Q26, Q28, Q29, Q35 |
| 8 | 2N7002 | SC-59 | Q10, Q11, Q13, Q20, Q23, Q24, Q27, Q40 |
| 4 | 2N7002 | SOT-23 | Q21, Q25, Q34, Q38 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J11 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_SDCard_DM3AT | J12 |
| 4 | 1N5819WS | Diode_SOD-323 | D1, D8, D16, D18 |
| 30 | 0.1uF | C_0402_1005Metric | C1, C2, C3, C6, C7, C8, C11, C12 +22 |
| 2 | 22pF | C_0603_1608Metric | C4, C5 |
| 2 | 4.7uF | C_0603_1608Metric | C9, C20 |
| 3 | 10uF_50V | C_0805_2012Metric | C10, C16, C17 |
| 7 | 1uF | C_0402_1005Metric | C15, C23, C24, C25, C47, C49, C63 |
| 2 | 2.2uF | C_0402_1005Metric | C19, C62 |
| 1 | ADJ_ST | C_0603_1608Metric | C21 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1uF | C_0603_1608Metric | C30 |
| 9 | 100uF | C_1206_3216Metric | C32, C34, C56, C66, C67, C70, C73, C74 +1 |
| 4 | 10uF | C_0805_2012Metric | C45, C55, C68, C71 |
| 1 | 15pF | C_0402_1005Metric | C50 |
| 3 | 22uF | C_0805_2012Metric | C52, C53, C64 |
| 1 | 10nF | C_0402_1005Metric | C57 |
| 2 | 47pF | C_0603_1608Metric | C58, C59 |
| 1 | 4.7nF | C_0402_1005Metric | C65 |
| 15 | 1k | R_0402_1005Metric | R1, R44, R47, R71, R72, R73, R91, R107 +7 |
| 43 | 10k | R_0402_1005Metric | R2, R6, R7, R8, R9, R10, R16, R20 +35 |
| 9 | 510 | R_0402_1005Metric | R3, R42, R80, R81, R82, R83, R93, R94 +1 |
| 8 | 7.5k | R_0603_1608Metric | R11, R24, R28, R30, R37, R41, R77, R90 |
| 10 | 20k | R_0402_1005Metric | R12, R25, R31, R34, R38, R64, R66, R74 +2 |
| 22 | 2.2k | R_0402_1005Metric | R13, R14, R17, R18, R21, R22, R26, R27 +14 |
| 4 | 120 | R_0402_1005Metric | R15, R19, R23, R98 |
| 10 | 5.1k | R_0402_1005Metric | R29, R51, R52, R85, R86, R129, R136, R137 +2 |
| 5 | 2k | R_0402_1005Metric | R43, R54, R135, R145, R156 |
| 3 | 22k | R_0402_1005Metric | R55, R116, R121 |
| 1 | 1k | R_0603_1608Metric | R68 |
| 1 | 75k | R_0603_1608Metric | R69 |
| 1 | 10k | R_0603_1608Metric | R70 |
| 1 | 13k | R_0603_1608Metric | R99 |
| 1 | 1.8k | R_0603_1608Metric | R100 |
| 2 | 33 | R_0603_1608Metric | R101, R115 |
| 3 | 100k | R_0402_1005Metric | R119, R132, R141 |
| 2 | 100 | R_0603_1608Metric | R128, R142 |
| 1 | 3.3k | R_0402_1005Metric | R134 |
| 3 | 1M | R_0402_1005Metric | R146, R147, R150 |
| 1 | 1M | R_0603_1608Metric | R151 |
RasPi design files
The KiCad project lives in the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub; these links point at the commit this page was built from.
- Layoutcircuits/RasPi/RasPi.kicad_pcb
- Schematiccircuits/RasPi/RasPi.kicad_sch
RasPi: common questions
What microcontroller does the RasPi use?
The RasPi is built around the STM32H723VGTx, from the STM32 family.
How big is the RasPi PCB?
The RasPi measures 90 × 57 mm, has 4 copper layers and is 1.0404 mm thick.
How many components are on the RasPi?
270 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the RasPi design files?
From the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RasPi design in my own project?
The repository has no license, so all rights stay with Tomoshibi-technology. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RasPi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in MovingDisplay3-Circuit
STM32
Drive
Tomoshibi-technology
102.2 × 125.7 mm139 parts2LNo license0STM32
2ndLayer 3rdLayer
Tomoshibi-technology
53.9 × 71.7 mm137 parts2LNo license0DCDC
Tomoshibi-technology
100 × 100 mm85 parts2LNo license0Control
Tomoshibi-technology
35 × 35 mm74 parts4LNo license01stLayer Power
Tomoshibi-technology
62.9 × 90.7 mm51 parts2LNo license0MD
Tomoshibi-technology
35 × 35 mm28 parts4LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k