FSK-66-20-C
toms74209200·Order66·pcb/FSK-66-20-C.kicad_pcb
About the FSK-66-20-C PCB
FSK-66-20-C is an open source AVR/Arduino PCB design by toms74209200, published on GitHub under the MIT license. It is a 2-layer board measuring 285 × 108.3 mm, with 160 components from 14 distinct parts.
Its main chip is the ATmega32U4-AU, from the AVR/Arduino family. By type, the board carries 67 diodes, 66 switches, 11 capacitors, 7 resistors, 4 test points and 2 connectors.
It belongs with the keyboards designs in this gallery.
From the project
日本語入力のための60%キーボード
- 66 keys - Cherry MX/Kailh Choc/Kailh Choc V2 key switch compatible - USB type-C (USB2.0) interface - On-Board CPU(ATmega32U4)

Main components on the FSK-66-20-C
FSK-66-20-C bill of materials (BOM)
160 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-AU | ATMEGA32U4-AU | U1 |
| 1 | 16MHz | Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | USB type-C | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | 2x3_F | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | NANOSMDC050F/13.2 | Fuse_1206_3216Metric | F1 |
| 66 | SW_Push | CherryMX_Choc_V2_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +58 |
| 4 | ~ | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4 |
| 66 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +58 |
| 1 | RB161MM-20 | D_SOD-123F | D67 |
| 4 | 4.7u | C_0603_1608Metric | C1, C2, C3, C7 |
| 2 | 22p | C_0402_1005Metric | C4, C5 |
| 5 | 0.1u | C_0402_1005Metric | C6, C8, C9, C10, C11 |
| 5 | 10k | R_0402_1005Metric | R1, R2, R3, R6, R7 |
| 2 | 22 | R_0402_1005Metric | R4, R5 |
FSK-66-20-C design files
The KiCad project lives in the toms74209200/Order66 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/FSK-66-20-C.kicad_pcb
- Schematicpcb/FSK-66-20-C.kicad_sch
FSK-66-20-C: common questions
What microcontroller does the FSK-66-20-C use?
The FSK-66-20-C is built around the ATmega32U4-AU, from the AVR/Arduino family.
How big is the FSK-66-20-C PCB?
The FSK-66-20-C measures 285 × 108.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FSK-66-20-C?
160 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the FSK-66-20-C design files?
From the toms74209200/Order66 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FSK-66-20-C design in my own project?
Yes, under the terms of its MIT license, which toms74209200 chose for the repository.
Can I test firmware for the FSK-66-20-C without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Order66
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k