HardLabs

Gps interposer

tomverbeure·gps_interposer·gps_interposer/gps_interposer.kicad_pcb

Gps interposer PCB layout, top view — open source RP2040/RP2350 board by tomverbeure

About the Gps interposer PCB

Gps interposer is an open source RP2040/RP2350 PCB design by tomverbeure, published on GitHub. It is a 2-layer board measuring 60.1 × 48 mm, with 11 components from 9 distinct parts.

Its main chip is the RP20240-Zero, from the RP2040/RP2350 family. By type, the board carries 5 connectors, 5 resistors and 1 IC.

It belongs with the rf & radio designs in this gallery.

Main components on the Gps interposer

RP20240-Zero

Gps interposer bill of materials (BOM)

11 components, 9 distinct parts.

QtyPartRefs
1
RP20240-Zero
U3
1
Module Connector
J1
1
Motherboard/Carrier Connector
J2
1
Conn_01x05
J3
1
Conn_01x04
J4
1
Conn_01x04_Pin
J5
1
1k
R10
3
0
R14, R15, R29
1
9k
R19

Gps interposer design files

The KiCad project lives in the tomverbeure/gps_interposer repository on GitHub; these links point at the commit this page was built from.

Gps interposer: common questions

What microcontroller does the Gps interposer use?

The Gps interposer is built around the RP20240-Zero, from the RP2040/RP2350 family.

How big is the Gps interposer PCB?

The Gps interposer measures 60.1 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gps interposer?

11 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gps interposer design files?

From the tomverbeure/gps_interposer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gps interposer design in my own project?

The repository has no license, so all rights stay with tomverbeure. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Gps interposer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards