100base-T1-100base-TX-Media-Converter
tomy983·100base-T1-100base-TX-Media-Converter·kicad/100baseT1_100baseTX_MediaConverter.kicad_pcb
About the 100base-T1-100base-TX-Media-Converter PCB
100base-T1-100base-TX-Media-Converter is an open source PCB design by tomy983, published on GitHub under the MIT license. It is a 4-layer board measuring 75.9 × 25 mm, with 67 components from 17 distinct parts.
Other key parts include the XC6210B332MR-G, RTL8201F and TJA1101B. By type, the board carries 31 capacitors, 23 resistors, 4 connectors, 3 ICs, 3 inductors and 2 crystals.
From the project
PCB designet to convert automotive ethernet 100base-T1 to 100base-TX ethernet
This is a corrected version (the picture shows the previous revision). The correction consists of a missing resistor to set the TJA1101B MDIO address.
Another issue I had during bring up was the ferrite bead FB1, which I originally selected of incorrect value. (The TJA1101B was reporting low voltage on register 25 bits 15 and 14 (UVVDDD3V3 and UVVDDA3V3). I corrected it in the published schematic, but it is untested. On my PCB I've just shorted it.

Main components on the 100base-T1-100base-TX-Media-Converter
100base-T1-100base-TX-Media-Converter bill of materials (BOM)
67 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6210B332MR-G RT9080-33GJ5 | SOT-23-5 | U1 |
| 1 | RTL8201F | QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm_ThermalVias | U2 |
| 1 | TJA1101B | QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm_ThermalVias | U3 |
| 2 | 403C35D25M00000 | Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | RJ45_Hanrun_HR911105A_Horizontal | RJ45_Hanrun_HR911105A_Horizontal | J6 |
| 1 | ACT1210L-201-2P-TL00 | ACT1210L | FL1 |
| 3 | BLM18PG121SN1D | L_0603_1608Metric | FB1, FB2, FB3 |
| 20 | 0.1uF | C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C9, C11 +12 |
| 7 | 10uF | C_0603_1608Metric | C3, C12, C15, C19, C20, C25, C28 |
| 4 | 18pF | C_0603_1608Metric | C8, C10, C26, C30 |
| 14 | 4.7k | R_0603_1608Metric | R1, R2, R3, R5, R6, R7, R8, R9 +6 |
| 1 | 2K49 | R_0603_1608Metric | R4 |
| 2 | 510 | R_0603_1608Metric | R11, R12 |
| 2 | 10k | R_0603_1608Metric | R17, R18 |
| 4 | 49.9 | R_0603_1608Metric | R19, R20, R21, R22 |
100base-T1-100base-TX-Media-Converter design files
The KiCad project lives in the tomy983/100base-T1-100base-TX-Media-Converter repository on GitHub; these links point at the commit this page was built from.
100base-T1-100base-TX-Media-Converter: common questions
How big is the 100base-T1-100base-TX-Media-Converter PCB?
The 100base-T1-100base-TX-Media-Converter measures 75.9 × 25 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 100base-T1-100base-TX-Media-Converter?
67 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the 100base-T1-100base-TX-Media-Converter design files?
From the tomy983/100base-T1-100base-TX-Media-Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 100base-T1-100base-TX-Media-Converter design in my own project?
Yes, under the terms of its MIT license, which tomy983 chose for the repository.