12 open source boards using the XC6210B332MR-G
Real designs built with the XC6210B332MR-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
0xB2
plut0nium
17.8 × 33 mm36 parts2LCERN-OHL-S-2.0174RP2040/RP2350
Pcb
0xCB-dev
62 × 62 mm114 parts4LCustom license61RP2040/RP2350
Splinktegrated
Bastardkb
41.8 × 77.6 mm38 parts2LNo license48100base-T1-100base-TX-Media-Converter
tomy983
75.9 × 25 mm67 parts4LMIT1ESP32
Switch-Ornament
esprit1711
38 × 13.5 mm28 parts2LNo license1NXP
Unkey
natecermak
67 × 82.1 mm139 parts4LNo license0LoRa BOB
pete4radio
22.9 × 59.7 mm16 parts4LNo license0Bme688-breakouty
ezzatisawesome
30 × 20 mm15 parts4LNo license0RP2040/RP2350
Pcb panel
0xCB-dev
137 × 141 mm114 parts4LCustom license61STM32
Cameraboard
AFS-pt
46.1 × 45.6 mm77 parts4LNo license15AVR/Arduino
1337-v4.0
0xCB-dev
62 × 62 mm53 parts2LCustom license61AVR/Arduino
Panel
0xCB-dev
144 × 144 mm53 parts2LCustom license61
How designs wire the XC6210B332MR-G
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the XC6210B332MR-G connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 6 of 9 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 67% · a signal 33% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Not connected 78% | — |
| VOUTpin 5 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 0xB2 by plut0nium, 1337-v4.0 by 0xCB-dev, Splinktegrated by Bastardkb and Cameraboard by AFS-pt.
The XC6210B332MR-G in open source designs
The gallery holds 12 open source boards using the XC6210B332MR-G from 9 GitHub repositories; a typical one measures about 54 × 60.8 mm and carries around 53 components.
58% use four copper layers or more, and 17% carry an open source license.
The most starred is 0xB2 by plut0nium.
Parts used alongside the XC6210B332MR-G
Microcontrollers on boards using the XC6210B332MR-G
What boards using the XC6210B332MR-G are built for
XC6210B332MR-G: common questions
Where can I find a XC6210B332MR-G reference design?
Each of the 12 boards on this page is a real design using the XC6210B332MR-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC6210B332MR-G VIN pin?
The VIN pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the XC6210B332MR-G.
What decoupling capacitors do designs use on the XC6210B332MR-G VOUT pin?
The VOUT pin has a decoupling capacitor on 6 of 9 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the XC6210B332MR-G.
Which microcontrollers do boards using the XC6210B332MR-G use?
Most are built on RP2040/RP2350 (4), AVR/Arduino (2), ESP32 (1) and NXP (1).
How big is a typical board using the XC6210B332MR-G?
The median is 54 × 60.8 mm, and 42% are two-layer designs.
What is the most popular open source board using the XC6210B332MR-G?
By GitHub stars, 0xB2 by plut0nium, with 174 stars.
Can I simulate one of these boards using the XC6210B332MR-G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.