11 open source boards using the RTL8201F

Real designs built with the RTL8201F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the RTL8201F

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the RTL8201F connects to, and the resistors, capacitors and other passives placed on it.

  • The AVDD10OUT pin has a capacitor to GND on 7 of 7 designs, most often 100 nF.
  • The AVDD33 pins have a capacitor to GND on 7 of 7 designs, most often 100 nF (then 47 µF).
  • The DVDD10OUT pin has a capacitor to GND on 7 of 7 designs, most often 100 nF.
  • The RSET pin has a resistor to GND on 6 of 7 designs, most often 2.49 kΩ (then 4.99 kΩ).
RSETpin 1Connected to: Signal 86%
  • Resistor to GND on 86% · 2.49 kΩ (5), 4.99 kΩ (2)
AVDD10OUTpin 2Connected to: Signal 57% · AVDD10 43%
  • Capacitor to GND on 100% · 100 nF (7)
MDI+[0]pin 3Connected to: A connector 86%
  • Series resistor on 57% · 49.9 Ω (2), 50 Ω (1)
MDI-[0]pin 4Connected to: A connector 86%
  • Series resistor on 57% · 49.9 Ω (3)
MDI+[1]pin 5Connected to: A connector 86%
  • Series resistor on 57% · 49.9 Ω (3)
MDI-[1]pin 6Connected to: A connector 86%
  • Series resistor on 57% · 49.9 Ω (3)
AVDD33pin 7, 30Connected to: Signal 57% · 3.3V 43%
  • Capacitor to GND on 100% · 100 nF (25), 47 µF (2), 1 µF (2)
  • Inductor on 43%
RXDVpin 8Connected to: Signal 86%
  • Pull-up to 3.3V on 71% · 10 kΩ (3), 5.1 kΩ (1), 4.7 kΩ (1)
RXD2_INTBpin 11Connected to: Not connected 86%
RXCpin 13Connected to: Not connected 86%
DVDD33pin 14Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 86% · 100 nF (11), 47 µF (1)
TXD2pin 18Connected to: Not connected 86%
TXD3pin 19Connected to: Not connected 86%
PHYRSTBpin 21Connected to: Signal 100%
  • Pull-up to 3.3V on 57% · 10 kΩ (2), 5.1 kΩ (1), 4.7 kΩ (1)
  • Capacitor to GND on 43% · 1 nF (1), 4.7 µF (1), 100 nF (1)
MDIOpin 23Connected to: The microcontroller 43%, a connector 29%
  • Pull-up to 3.3V on 57% · 1.5 kΩ (2), 10 kΩ (1), 4.7 kΩ (1)
LED0_PHYAD0pin 24Connected to: A connector 29%
  • Series resistor on 57% · 240 Ω (2), 470 Ω (1), 270 Ω (1)
  • Resistor to GND on 57% · 10 kΩ (2), 4.7 kΩ (2)
LED1_PHYAD1pin 25Connected to: Signal 100%
  • Series resistor on 71% · 240 Ω (2), 470 Ω (1), 510 Ω (1)
  • Resistor to GND on 57% · 10 kΩ (2), 5.1 kΩ (1), 4.7 kΩ (1)
COLpin 27Connected to: Not connected 100%
DVDD10OUTpin 29Connected to: Signal 57% · DVDD10 43%
  • Capacitor to GND on 100% · 100 nF (7)
CKXTAL1pin 31Connected to: GND 43% · a signal 43%
  • Crystal on 43% · 25 MHz (1)
  • Capacitor to GND on 43% · 18 pF (2), 33 pF (1)
CKXTAL2pin 32Connected to: The microcontroller 29%
  • Crystal on 43% · 25 MHz (1)
  • Capacitor to GND on 43% · 18 pF (2), 33 pF (1)
GNDpin 33Connected to: GND 100%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jeadock by riktw, LAN-Module by jorticus, Zamkonator by alufers and RhapsodiePi by theBrutzler.

The RTL8201F in open source designs

The gallery holds 11 open source boards using the RTL8201F from 7 GitHub repositories; a typical one measures about 75.1 × 61 mm and carries around 100 components.

55% are two-layer designs, the rest use four layers or more, and 73% carry an open source license.

The most starred is Jeadock by riktw.

Parts used alongside the RTL8201F

Microcontrollers on boards using the RTL8201F

RTL8201F: common questions

Where can I find a RTL8201F reference design?

Each of the 11 boards on this page is a real design using the RTL8201F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RTL8201F AVDD10OUT pin connected?

The AVDD10OUT pin has a capacitor to GND on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the RTL8201F.

How is the RTL8201F AVDD33 pin connected?

The AVDD33 pins have a capacitor to GND on 7 of 7 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 7 open source designs using the RTL8201F.

How is the RTL8201F DVDD10OUT pin connected?

The DVDD10OUT pin has a capacitor to GND on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the RTL8201F.

Which microcontrollers do boards using the RTL8201F use?

Most are built on ESP32 (6) and Raspberry Pi (1).

How big is a typical board using the RTL8201F?

The median is 75.1 × 61 mm, and 55% are two-layer designs.

What is the most popular open source board using the RTL8201F?

By GitHub stars, Jeadock by riktw, with 12 stars.

Can I simulate one of these boards using the RTL8201F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part