MPPT
TotallyNotAHackerTrustMeIAmADolphin·MPPT·hardware/KiCad/openMPPT_v1.3.kicad_pcb
About the MPPT PCB
MPPT is an open source STM32 PCB design by TotallyNotAHackerTrustMeIAmADolphin, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 125.2 × 72.2 mm, with 129 components from 53 distinct parts.
Its main chip is the STM32F072RBT6, from the STM32 family. Other key parts include the CC6937S8-3FB020, SCT2A25STER and SY8120B1ABC. By type, the board carries 48 capacitors, 36 resistors, 10 diodes, 5 ICs, 4 transistors and 3 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Open Source Bi-Directional Synchronus Buck-Boost converter for 20A@80V
(See CALCULATIONS.typ for full design justification and E24/E96 resistor value derivations.)
Main components on the MPPT
MPPT bill of materials (BOM)
129 components, 53 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072RBT6 ST(意法半导体) | LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL | U1 |
| 2 | CC6937S8-3FB020 CrossChip(成都芯进) | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | U2, U3 |
| 1 | SCT2A25STER SCT(芯洲科技) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U4 |
| 1 | SY8120B1ABC Silergy(矽力杰) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U5 |
| 4 | BSC030N08NS5 Infineon | PG-TDSON-8_L5.0-W6.0-P1.27-BL-EP | Q1, Q2, Q3, Q4 |
| 2 | Tactile Button, 160gf XUNPU | SW_TS-1088-AR02016 | BOOT1, RESET1 |
| 1 | 100nF YAGEO | C_0603 | CC_Boot1 |
| 2 | TCC1210X7R225K101MT 2.2uF CCTC(三环) | C1210 | C_IN1, C_IN2 |
| 1 | 100nF Samsung Electro-Mechanics | C_0805 | C_IN_BYPASS1 |
| 2 | 22uF Samsung Electro-Mechanics | C_0805 | C_OUT1, C_OUT2 |
| 4 | 100nF Samsung Electro-Mechanics | C_0402 | C_VDD1, C_VDD2, C_VDD3, C_VDDIO1 |
| 2 | 4.7uF Samsung Electro-Mechanics | C_0402 | C_VDD4, C_VDDIO2 |
| 1 | 10nF Samsung Electro-Mechanics | C_0402 | C_VDDA1 |
| 1 | 1uF Samsung Electro-Mechanics | C_0402 | C_VDDA2 |
| 2 | IRS21867STRPBF Infineon(英飞凌) | SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | UA1, UB1 |
| 1 | TYPE-C 16PIN 2MD(073) TYPE-C 16PIN 2MD SHOU HAN(首韩) | USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB1 |
| 2 | XT60PW-M AMASS(艾迈斯) | CONN-TH_XT60PW-M | VIN1, VOUT1 |
| 2 | KT-0603R KENTO | LED_0603_1608Metric | LED1, LED2 |
| 6 | SS210 MDD(Microdiode Electronics) | D_SMA | D1, D2, D3, D4, D5, D6 |
| 1 | SS510 hongjiacheng | D_SMA | D7 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 12V hongjiacheng | DFN2020-3_L2.0-W2.0-P0.65-BR-1 | D8 |
| 2 | 85V hongjiacheng | D_SMC | D10, D11 |
| 1 | GXDR1207-470MT 47uH FAUKU(高芯电子) | IND-SMD_L12.5-W12.5-1 | L2 |
| 1 | FTC201610S4R7MBCA 4.7uH cjiang(长江微电) | IND-SMD_L2.0-W1.6-B | L3 |
| 1 | HCZH-3218-150-M YOUCHI(佑驰) | IND-TH_L33.5-W23.0-P12.00_HCZH-3218 | L4 |
| 20 | 100nF Samsung Electro-Mechanics | C_0805 | C1, C2, C3, C4, C5, C6, C7, C8 +12 |
| 2 | 10uF Samsung Electro-Mechanics | C_0603 | C9, C19 |
| 4 | 1nF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C10, C11, C26, C27 |
| 3 | 100nF Samsung Electro-Mechanics | C_0402 | C12, C28, C31 |
| 2 | 10nF Samsung Electro-Mechanics | C_0402 | C13, C24 |
| 3 | 1uF Samsung Electro-Mechanics | C_0402 | C14, C25, C30 |
| 8 | LKML2502A331MF 330uF Ymin(永铭) | CAP-TH_BD12.5-P5.00-D0.6-FD | C15, C16, C17, C18, C20, C21, C22, C23 |
| 1 | 1uF SAMSUNG(三星) | C_0402_1005Metric | C29 |
| 1 | 150pF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C32 |
| 1 | 47pF Samsung Electro-Mechanics | C_0603 | C33 |
| 1 | 100nF YAGEO | C_0603 | C34 |
| 1 | 4.7uF Samsung Electro-Mechanics | C_0603 | C35 |
| 1 | 22uF Samsung Electro-Mechanics | C_0603 | C36 |
| 2 | 510Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R1, R2 |
| 8 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R3, R4, R11, R12, R22, R23, R25, R26 |
| 2 | 200kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R5, R13 |
| 2 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R6, R14 |
| 2 | 47Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R7, R8 |
| 4 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R9, R10, R17, R18 |
| 2 | 110kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R15, R30 |
| 2 | 10kΩ UNI-ROYAL(厚声) | R_0402_1005Metric | R19, R20 |
| 2 | 5.1kΩ UNI-ROYAL(厚声) | R_0402_1005Metric | R21, R24 |
| 1 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R29 |
| 2 | 15kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R31, R33 |
| 1 | 68kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R32 |
| 1 | 430kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R34 |
| 1 | 47kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R35 |
| 4 | 2.2Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R36, R37, R38, R39 |
MPPT design files
The KiCad project lives in the TotallyNotAHackerTrustMeIAmADolphin/MPPT repository on GitHub; these links point at the commit this page was built from.
MPPT: common questions
What microcontroller does the MPPT use?
The MPPT is built around the STM32F072RBT6, from the STM32 family.
How big is the MPPT PCB?
The MPPT measures 125.2 × 72.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MPPT?
129 components, from 53 distinct parts. The full bill of materials is listed on this page.
Where can I download the MPPT design files?
From the TotallyNotAHackerTrustMeIAmADolphin/MPPT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MPPT design in my own project?
Yes, under the terms of its GPL-3.0 license, which TotallyNotAHackerTrustMeIAmADolphin chose for the repository.
Can I test firmware for the MPPT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k