6 open source boards using the STM32F072RBT6
Real designs built with the STM32F072RBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mynd Main
teufelaudio
75 × 136 mm560 parts4LCC-BY-SA-4.076STM32
Honeydew
ghostlybutterfly
331.8 × 166.1 mm278 parts2LCERN-OHL-S-2.033STM32
Honeydew
Kaleidogeist
331.8 × 166.1 mm278 parts2LCERN-OHL-S-2.033STM32
Mynd Main
Prototype-Fund-Hardware
75 × 136 mm560 parts4LNo license3STM32
Embedded-AGC-DSKY-emulator
Gregox273
91 × 120 mm157 parts2LGPL-3.03STM32
MPPT
TotallyNotAHackerTrustMeIAmADolphin
125.2 × 72.2 mm129 parts2LGPL-3.00
How designs wire the STM32F072RBT6
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F072RBT6 connects to, and the resistors, capacitors and other passives placed on it.
- The NRST pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 1 µF).
- The BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ (then 1 MΩ).
- The VBAT pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
- The PF0 pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 100% |
|
| PC13pin 2 | Connected to: Signal 50% · not connected 33% · VBUS 17% |
|
| PC14pin 3 | Connected to: Not connected 83% · a signal 17% | — |
| PC15pin 4 | Connected to: Not connected 83% · a signal 17% | — |
| PF0pin 5 | Connected to: Not connected 100% | — |
| PF1pin 6 | Connected to: Not connected 67% · a signal 33% |
|
| NRSTpin 7 | Connected to: A connector 83% |
|
| PC0pin 8 | Connected to: Not connected 50% · a signal 50% |
|
| PC1pin 9 | Connected to: Not connected 50% · a signal 50% |
|
| PC2pin 10 | Connected to: Not connected 67% · a signal 33% |
|
| PC3pin 11 | Connected to: Not connected 67% · a signal 33% |
|
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: 3.3V 67% · a signal 33% |
|
| PA0pin 14 | Connected to: Not connected 50% · a signal 50% |
|
| PA2pin 16 | Connected to: A connector 83%, SGM7227YUWQ10G 33% |
|
| PA3pin 17 | Connected to: A connector 83%, SGM7227YUWQ10G 33% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 64 | Connected to: 3.3V 100% |
|
| PA4pin 20 | Connected to: A connector 33% · not connected 17% |
|
| PA5pin 21 | Connected to: A connector 33% · VBATADC 33% |
|
| PA6pin 22 | Connected to: SGM7227YUWQ10G 33%, a connector 33% · not connected 17% |
|
| PA7pin 23 | Connected to: INA181A1IDBVR 33%, a connector 33% |
|
| PC4pin 24 | Connected to: Signal 83% · not connected 17% |
|
| PC5pin 25 | Connected to: Signal 83% · not connected 17% |
|
| PB0pin 26 | Connected to: Signal 83% · not connected 17% |
|
| PB1pin 27 | Connected to: Signal 67% · not connected 33% |
|
| PB2pin 28 | Connected to: Signal 83% · not connected 17% |
|
| PB10pin 29 | Connected to: Signal 100% |
|
| PB11pin 30 | Connected to: Signal 100% |
|
| PB12pin 33 | Connected to: Signal 100% |
|
| PB13pin 34 | Connected to: Signal 100% |
|
| PB14pin 35 | Connected to: Signal 100% |
|
| PB15pin 36 | Connected to: Signal 100% |
|
| PC6pin 37 | Connected to: Signal 100% |
|
| PC7pin 38 | Connected to: Signal 100% |
|
| PC8pin 39 | Connected to: Signal 67% · not connected 33% |
|
| PC9pin 40 | Connected to: Not connected 50% · a signal 50% |
|
| PA8pin 41 | Connected to: Signal 100% |
|
| PA9pin 42 | Connected to: Signal 67% · not connected 33% |
|
| PA10pin 43 | Connected to: Not connected 50% · a signal 50% |
|
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mynd Main by teufelaudio, Honeydew by ghostlybutterfly, Honeydew by Kaleidogeist and Embedded-AGC-DSKY-emulator by Gregox273.
The STM32F072RBT6 in open source designs
The gallery holds 6 open source boards using the STM32F072RBT6 from 6 GitHub repositories; a typical one measures about 108.1 × 136 mm and carries around 278 components.
67% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Mynd Main by teufelaudio.
Parts used alongside the STM32F072RBT6
Microcontrollers on boards using the STM32F072RBT6
What boards using the STM32F072RBT6 are built for
STM32F072RBT6: common questions
Where can I find a STM32F072RBT6 reference design?
Each of the 6 boards on this page is a real design using the STM32F072RBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F072RBT6 NRST pin connected?
The NRST pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F072RBT6.
What resistor goes on the STM32F072RBT6 BOOT0 pin?
The BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ (then 1 MΩ). Counted from the KiCad layouts of 6 open source designs using the STM32F072RBT6.
What decoupling capacitors do designs use on the STM32F072RBT6 VBAT pin?
The VBAT pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F072RBT6.
What parts are used alongside the STM32F072RBT6?
The BQ25713RSNR, FT24C512A-TSR-T, INA181A1IDBVR, LM51231QRGRRQ1 and PTPS25751SRSMR appear in the most repositories here.
Which microcontrollers do boards using the STM32F072RBT6 use?
Most are built on STM32 (6).
How big is a typical board using the STM32F072RBT6?
The median is 108.1 × 136 mm, and 67% are two-layer designs.
What is the most popular open source board using the STM32F072RBT6?
By GitHub stars, Mynd Main by teufelaudio, with 76 stars.
Can I simulate one of these boards using the STM32F072RBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.