2 open source boards using the SY8120B1ABC

Real designs built with the SY8120B1ABC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SY8120B1ABC in open source designs

The gallery holds 2 open source boards using the SY8120B1ABC from 2 GitHub repositories; a typical one measures about 105.1 × 63.1 mm and carries around 133 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Pergola by pergola-fpga.

Microcontrollers on boards using the SY8120B1ABC

What boards using the SY8120B1ABC are built for

SY8120B1ABC: common questions

Where can I find a SY8120B1ABC reference design?

Each of the 2 boards on this page is a real design using the SY8120B1ABC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SY8120B1ABC use?

Most are built on FPGA (1) and STM32 (1).

How big is a typical board using the SY8120B1ABC?

The median is 105.1 × 63.1 mm, and 50% are two-layer designs.

What is the most popular open source board using the SY8120B1ABC?

By GitHub stars, Pergola by pergola-fpga, with 81 stars.

Can I simulate one of these boards using the SY8120B1ABC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part