3 open source boards using the EL817S

Real designs built with the EL817S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The EL817S in open source designs

The gallery holds 3 open source boards using the EL817S from 3 GitHub repositories; a typical one measures about 75 × 64 mm and carries around 55 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Ublink by koraa.

Microcontrollers on boards using the EL817S

What boards using the EL817S are built for

EL817S: common questions

Where can I find a EL817S reference design?

Each of the 3 boards on this page is a real design using the EL817S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the EL817S use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the EL817S?

The median is 75 × 64 mm, and 100% are two-layer designs.

What is the most popular open source board using the EL817S?

By GitHub stars, Ublink by koraa, with 1 stars.

Can I simulate one of these boards using the EL817S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part