Crab robot v2
triluongmh-byte·crab-robot-v2·design/main.kicad_pcb
About the Crab robot v2 PCB
Crab robot v2 is an open source PCB design by triluongmh-byte, published on GitHub. It is a 2-layer board measuring 60 × 30 mm, with 0 components from 0 distinct parts.
It belongs with the robotics & motion designs in this gallery.
From the project
main.kicadpro` is the only physical PCB project: its matching schematic and PCB describe the passive 60 × 30 mm distributor. Publish and verify it with the unchanged native manufacturing checks.
main.kicadpro` is the only physical PCB project: its matching schematic and PCB describe the passive 60 × 30 mm distributor. Publish and verify it with the unchanged native manufacturing checks.
system.kicadsch is a standalone KiCad schematic document for the external wiring harness. Open it directly in KiCad's Schematic Editor. It intentionally has no project or PCB: the external modules, protection and signal conditioning remain outside the distributor. All its symbol instances have onboard no and empty footprints. Module-internal parts are still distinguished in its BOM.
Crab robot v2 design files
The KiCad project lives in the triluongmh-byte/crab-robot-v2 repository on GitHub; these links point at the commit this page was built from.
Crab robot v2: common questions
How big is the Crab robot v2 PCB?
The Crab robot v2 measures 60 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Crab robot v2?
0 components, from 0 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Crab robot v2 design files?
From the triluongmh-byte/crab-robot-v2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Crab robot v2 design in my own project?
The repository has no license, so all rights stay with triluongmh-byte. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979