Pico bmc
tronnet-gh·pico-bmc·hardware/kicad/pico_bmc.kicad_pcb
About the Pico bmc PCB
Pico bmc is an open source RP2040/RP2350 PCB design by tronnet-gh, published on GitHub. It is a 4-layer board, with 45 components from 18 distinct parts.
Its main chip is the RaspberryPi_Pico_W_SecondaryPins, from the RP2040/RP2350 family. Other key parts include the TFP401APZPR and TXS0102DCT. By type, the board carries 23 capacitors, 7 resistors, 6 connectors, 4 inductors, 3 ICs and 2 transistors.
Main components on the Pico bmc
Pico bmc bill of materials (BOM)
45 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico_W_SecondaryPins | RaspberryPi_Pico_W_SMD | U1 |
| 1 | TFP401APZPR | TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm_ThermalVias | U2 |
| 1 | TXS0102DCT | SSOP-8_2.95x2.8mm_P0.65mm | U3 |
| 2 | NMOS | SOT-23 | Q1, Q2 |
| 1 | PW_STATE_IN | PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | HDMI_A | HDMI_A_Molex_208658-1001_Horizontal | J3 |
| 1 | PW_STATE_OUT | PinHeader_1x02_P2.00mm_Vertical | J4 |
| 1 | PW_SWITCH_IN | PinHeader_1x02_P2.00mm_Vertical | J5 |
| 1 | PW_SWITCH_OUT | PinHeader_1x02_P2.00mm_Vertical | J6 |
| 1 | USB_C_Plug | P1 | |
| 4 | BLM18RK601SN1D | L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 18 | 0.1u | C_0402_1005Metric | C1, C2, C3, C4, C6, C7, C8, C9 +10 |
| 4 | 10u | C_0603_1608Metric | C5, C10, C11, C16 |
| 1 | 4.7u | C_0603_1608Metric | C17 |
| 2 | 1k | R_0805_2012Metric | R1, R2 |
| 2 | 2.2k | R_0402_1005Metric | R3, R4 |
| 2 | 4.7k | R_0402_1005Metric | R5, R6 |
| 1 | 5.1k | R7 |
Pico bmc design files
The KiCad project lives in the tronnet-gh/pico-bmc repository on GitHub; these links point at the commit this page was built from.
Pico bmc: common questions
What microcontroller does the Pico bmc use?
The Pico bmc is built around the RaspberryPi_Pico_W_SecondaryPins, from the RP2040/RP2350 family.
How big is the Pico bmc PCB?
The Pico bmc has 4 copper layers and is 1.5204 mm thick.
How many components are on the Pico bmc?
45 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pico bmc design files?
From the tronnet-gh/pico-bmc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pico bmc design in my own project?
The repository has no license, so all rights stay with tronnet-gh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pico bmc without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k