HardLabs

Tropic01-stm32u5-usb devkit hw

tropicsquare·tropic01-stm32u5-usb-devkit-hw·TS1302_design/ts13_dev_kit.kicad_pcb

Tropic01-stm32u5-usb devkit hw PCB layout, top view — open source STM32 board by tropicsquare

About the Tropic01-stm32u5-usb devkit hw PCB

Tropic01-stm32u5-usb devkit hw is an open source STM32 PCB design by tropicsquare, published on GitHub under the BSD-3-Clause-Clear license. It is a 2-layer board measuring 20 × 46 mm, with 37 components from 21 distinct parts.

Its main chip is the STM32U535CCTX, from the STM32 family. Other key parts include the TROPIC01_CHIP, TPS7A0533PDBZR and TPS22917DBV. By type, the board carries 14 capacitors, 13 resistors, 4 ICs, 2 diodes, 1 crystal and 1 connector.

From the project

Contains design files for TROPIC01 usb devkit based on STM32U5

This folder contains manufacturing files for TS1302 revision of TROPIC01 usb development kit.

Main components on the Tropic01-stm32u5-usb devkit hw

TROPIC01_CHIPSTM32U535CCTXTPS7A0533PDBZRTPS22917DBV

Tropic01-stm32u5-usb devkit hw bill of materials (BOM)

37 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TROPIC01_CHIP
TROPIC01_chip
IC1
1
STM32U535CCTX
STM32U535CCTx
IC2
1
TPS7A0533PDBZR
IC3
1
TPS22917DBV
IC4
1
8MHZ
8MHz
X1
1
179-UP20CFGFLP12TR
USB_C_Plug
J1
1
594-MFU0805FF00500P1
Fuse 500mA
F1
1
611-PTS636SM25SMTRLF
tact switch
SW1
1
710-150080RS75000
LED_R
D1
1
PRTR5V0U2X
D2
3
100N/603
100n/603
C1, C2, C3
3
4U7/16V
4u7/16V
C4, C7, C14
4
100N
100n
C5, C6, C9, C13
2
10N
10n
C8, C10
2
10P
10p
C11, C12
1
33K
33k
R1
7
1k
R2, R3, R4, R5, R6, R7, R13
1
5K1
5k1
R8
2
10R
R9, R10
1
1K5
1k5
R11
Show 1 more
QtyPartRefs
1
220R
R12

Tropic01-stm32u5-usb devkit hw design files

The KiCad project lives in the tropicsquare/tropic01-stm32u5-usb-devkit-hw repository on GitHub; these links point at the commit this page was built from.

Tropic01-stm32u5-usb devkit hw: common questions

What microcontroller does the Tropic01-stm32u5-usb devkit hw use?

The Tropic01-stm32u5-usb devkit hw is built around the STM32U535CCTX, from the STM32 family.

How big is the Tropic01-stm32u5-usb devkit hw PCB?

The Tropic01-stm32u5-usb devkit hw measures 20 × 46 mm, has 2 copper layers and is 0.89 mm thick.

How many components are on the Tropic01-stm32u5-usb devkit hw?

37 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tropic01-stm32u5-usb devkit hw design files?

From the tropicsquare/tropic01-stm32u5-usb-devkit-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Tropic01-stm32u5-usb devkit hw design in my own project?

Yes, under the terms of its BSD-3-Clause-Clear license, which tropicsquare chose for the repository.

Can I test firmware for the Tropic01-stm32u5-usb devkit hw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards