22 open source boards using the TPS22917DBV

Real designs built with the TPS22917DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the TPS22917DBV

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the TPS22917DBV connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 17 of 18 designs, most often 1 µF (then 10 µF).
  • The VOUT pin has a capacitor to GND on 13 of 18 designs, most often 100 nF (then 10 µF).
  • The QOD pin has a series resistor on 8 of 18 designs, most often 220 Ω (then 470 Ω).
  • The VOUT pin has a series resistor on 8 of 18 designs, most often 220 Ω (then 1 kΩ).
VINpin 1Connected to: 3.3V 61% · a signal 39%
  • Decoupling capacitor on 94% · 1 µF (8), 10 µF (6), 100 nF (6)
  • Capacitor on 50% · 1 nF (4), 10 nF (2), 22 µF (2)
GNDpin 2Connected to: GND 100%
QODpin 5Connected to: Signal 72% · not connected 17%
  • Series resistor on 44% · 220 Ω (3), 470 Ω (1), 4.7 Ω (1)
VOUTpin 6Connected to: A connector 33% · 5V 33%
  • Capacitor to GND on 72% · 100 nF (11), 10 µF (6), 1 µF (4)
  • Series resistor on 44% · 220 Ω (3), 1 kΩ (2), 470 Ω (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Anyon e motherboard by byrantech, EinkPDA keyboard by TalismanDesign, ClimateSprinklerController by kbx81 and SolarMeshtasticNode by h0lad.

The TPS22917DBV in open source designs

The gallery holds 22 open source boards using the TPS22917DBV from 18 GitHub repositories; a typical one measures about 78.8 × 73.5 mm and carries around 153 components.

64% use four copper layers or more, and 36% carry an open source license.

The most starred is Anyon e motherboard by byrantech.

Microcontrollers on boards using the TPS22917DBV

TPS22917DBV: common questions

Where can I find a TPS22917DBV reference design?

Each of the 22 boards on this page is a real design using the TPS22917DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS22917DBV VIN pin?

The VIN pin has a decoupling capacitor on 17 of 18 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 18 open source designs using the TPS22917DBV.

How is the TPS22917DBV VOUT pin connected?

The VOUT pin has a capacitor to GND on 13 of 18 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 18 open source designs using the TPS22917DBV.

What resistor goes on the TPS22917DBV QOD pin?

The QOD pin has a series resistor on 8 of 18 designs, most often 220 Ω (then 470 Ω). Counted from the KiCad layouts of 18 open source designs using the TPS22917DBV.

What parts are used alongside the TPS22917DBV?

The BME280, STM32U535CCTX, TPS7A0533PDBZR, TROPIC01_CHIP and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the TPS22917DBV use?

Most are built on STM32 (4), RP2040/RP2350 (3), ESP32 (2) and FPGA (2).

How big is a typical board using the TPS22917DBV?

The median is 78.8 × 73.5 mm, and 36% are two-layer designs.

What is the most popular open source board using the TPS22917DBV?

By GitHub stars, Anyon e motherboard by byrantech, with 4,264 stars.

Can I simulate one of these boards using the TPS22917DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part