11 open source boards using the TROPIC01_CHIP
Real designs built with the TROPIC01_CHIP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
WCH CH32/CH55x
SandKrux
sandman21vs
58.3 × 98.2 mm163 parts2LNo license21STM32
Tropic01-stm32u5-usb devkit hw
tropicsquare
20 × 46 mm37 parts2LBSD-3-Clause-Clear5STM32
Ts13 dev kit
tropicsquare
20 × 46 mm39 parts2LCERN-OHL-P-2.04RP2040/RP2350
Wuard core v1
wuard
17.8 × 19.9 mm28 parts2LCERN-OHL-S-2.01Ts17-tropic01-mini
tropicsquare
15.2 × 12 mm5 parts2LBSD-3-Clause-Clear1STM32
Ts13-dev kit
tropicsquare
20 × 46 mm37 parts2LBSD-3-Clause-Clear0AVR/Arduino
Ts14-arduino shield
tropicsquare
58 × 53 mm13 parts2LNo license0Ts15-tropic01-rpi shield
tropicsquare
56 × 65 mm11 parts2LNo license0AVR/Arduino
Ts14-arduino shield
tropicsquare
58 × 53 mm13 parts2LCERN-OHL-P-2.04Ts15-rpi shield
tropicsquare
56 × 65 mm11 parts2LCERN-OHL-P-2.04Ts17-tropic01-mini
tropicsquare
15.2 × 12 mm5 parts2LCERN-OHL-P-2.04
How designs wire the TROPIC01_CHIP
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TROPIC01_CHIP connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pins have a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 4.7 µF).
- The PULLDN pins is tied to GND on 100% of them.
- The TP pin is tied to GND on 8 of 8 designs.
- The PULLUP pin is tied to VCC on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1, 11, 24 | Connected to: VCC 63% · a signal 38% |
|
| GNDpin 2, 12, 23 | Connected to: GND 100% | — |
| PULLDNpin 3, 9, 10, 30, 31 | Connected to: GND 100% | — |
| GPOpin 4 | Connected to: A connector 38% |
|
| SDIpin 5 | Connected to: A connector 38% |
|
| SDOpin 6 | Connected to: A connector 38% |
|
| SCKpin 7 | Connected to: A connector 38% |
|
| CSNpin 8 | Connected to: A connector 38% |
|
| DNCpin 13, 14, 17, 18, 19, 20, 21, 26, 27, 28, 29 | Connected to: Not connected 100% | — |
| NCpin 15, 16, 25, 32 | Connected to: Not connected 100% | — |
| PULLUPpin 22 | Connected to: VCC 63% · a signal 38% | — |
| TPpin 33 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SandKrux by sandman21vs, Tropic01-stm32u5-usb devkit hw by tropicsquare, Ts13 dev kit by tropicsquare and Ts17-tropic01-mini pcb by tropicsquare.
The TROPIC01_CHIP in open source designs
The gallery holds 11 open source boards using the TROPIC01_CHIP from 8 GitHub repositories; a typical one measures about 20 × 46 mm and carries around 13 components.
100% are two-layer designs, the rest use four layers or more, and 73% carry an open source license.
The most starred is SandKrux by sandman21vs.
Parts used alongside the TROPIC01_CHIP
Microcontrollers on boards using the TROPIC01_CHIP
What boards using the TROPIC01_CHIP are built for
TROPIC01_CHIP: common questions
Where can I find a TROPIC01_CHIP reference design?
Each of the 11 boards on this page is a real design using the TROPIC01_CHIP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TROPIC01_CHIP VCC pin?
The VCC pins have a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the TROPIC01_CHIP.
How is the TROPIC01_CHIP PULLDN pin connected?
The PULLDN pins is tied to GND on 100% of them. Counted from the KiCad layouts of 8 open source designs using the TROPIC01_CHIP.
How is the TROPIC01_CHIP TP pin connected?
The TP pin is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TROPIC01_CHIP.
What parts are used alongside the TROPIC01_CHIP?
The STM32U535CCTX, TPS22917DBV, TPS7A0533PDBZR and TXU0304PWR appear in the most repositories here.
Which microcontrollers do boards using the TROPIC01_CHIP use?
Most are built on STM32 (3), AVR/Arduino (2), WCH CH32/CH55x (1) and RP2040/RP2350 (1).
How big is a typical board using the TROPIC01_CHIP?
The median is 20 × 46 mm, and 100% are two-layer designs.
What is the most popular open source board using the TROPIC01_CHIP?
By GitHub stars, SandKrux by sandman21vs, with 21 stars.
Can I simulate one of these boards using the TROPIC01_CHIP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.