Ts13-dev kit
tropicsquare·ts13-dev-kit
About the Ts13-dev kit PCB
Ts13-dev kit is an open source STM32 PCB design by tropicsquare, published on GitHub under the BSD-3-Clause-Clear license. It is a 2-layer board measuring 20 × 46 mm, with 37 components from 21 distinct parts.
Its main chip is the STM32U535CCTX, from the STM32 family. Other key parts include the TROPIC01_CHIP, TPS7A0533PDBZR and TPS22917DBV. By type, the board carries 14 capacitors, 13 resistors, 4 ICs, 2 diodes, 1 crystal and 1 connector.
From the project
TS13 DevKit
TS13 – TROPIC01 USB Development Kit A KiCad-based hardware project providing a minimal development platform for the TROPIC01 chip.
The TS13 features a USB-C interface and an STM32 microcontroller acting as a USB-to-SPI converter, enabling straightforward host communication with TROPIC01.
For firmware details and usage instructions, see the ts-usb-dev-kit-fw.git README.
Main components on the Ts13-dev kit
Ts13-dev kit bill of materials (BOM)
37 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TROPIC01_CHIP TROPIC01_chip | QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | IC1 |
| 1 | STM32U535CCTX STM32U535CCTx | LQFP-48_7x7mm_P0.5mm | IC2 |
| 1 | TPS7A0533PDBZR | SOT-23-3 | IC3 |
| 1 | TPS22917DBV | SOT-23-6 | IC4 |
| 1 | 8MHZ 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | 179-UP20CFGFLP12TR USB_C_Plug | USB_C_plug_UP20CFGFL-P12 | J1 |
| 1 | 594-MFU0805FF00500P1 Fuse 500mA | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | F1 |
| 1 | 611-PTS636SM25SMTRLF tact switch | SW_SPST_FSMSM | SW1 |
| 1 | 710-150080RS75000 LED_R | LED_0805_2012Metric | D1 |
| 1 | PRTR5V0U2X | SOT-143 | D2 |
| 3 | 100N/603 100n/603 | C_0603_1608Metric | C1, C2, C3 |
| 3 | 4U7/16V 4u7/16V | C_0805_2012Metric | C4, C7, C14 |
| 4 | 100N 100n | C_0402_1005Metric | C5, C6, C9, C13 |
| 2 | 10N 10n | C_0402_1005Metric | C8, C10 |
| 2 | 10P 10p | C_0402_1005Metric | C11, C12 |
| 1 | 33K 33k | R_0402_1005Metric | R1 |
| 7 | 1k | R_0402_1005Metric | R2, R3, R4, R5, R6, R7, R13 |
| 1 | 5K1 5k1 | R_0402_1005Metric | R8 |
| 2 | 10R | R_0402_1005Metric | R9, R10 |
| 1 | 1K5 1k5 | R_0402_1005Metric | R11 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220R | R_0402_1005Metric | R12 |
Ts13-dev kit design files
The KiCad project lives in the tropicsquare/ts13-dev-kit repository on GitHub; these links point at the commit this page was built from.
- Layoutts13_dev_kit.kicad_pcb
- Schematicts13_dev_kit.kicad_sch
- BOMbom/bom.csv
Ts13-dev kit: common questions
What microcontroller does the Ts13-dev kit use?
The Ts13-dev kit is built around the STM32U535CCTX, from the STM32 family.
How big is the Ts13-dev kit PCB?
The Ts13-dev kit measures 20 × 46 mm, has 2 copper layers and is 0.89 mm thick.
How many components are on the Ts13-dev kit?
37 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ts13-dev kit design files?
From the tropicsquare/ts13-dev-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ts13-dev kit design in my own project?
Yes, under the terms of its BSD-3-Clause-Clear license, which tropicsquare chose for the repository.
Can I test firmware for the Ts13-dev kit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k