68HC11 standard

truhy·Tru11·Schematics/68HC11_standard/68HC11_standard.kicad_pcb

68HC11 standard PCB layout, top view — open source board by truhy

About the 68HC11 standard PCB

68HC11 standard is an open source PCB design by truhy, published on GitHub under the MIT license. It is a 2-layer board measuring 78 × 87.4 mm, with 16 components from 11 distinct parts.

Other key parts include the 68HC11_PLCC52. By type, the board carries 6 resistors, 4 capacitors, 3 switches, 1 IC, 1 crystal and 1 connector.

It belongs with the usb & debug tools designs in this gallery.

From the project

A command line program for reading and writing Motorola 68HC11 series microcontroller (MCU).

A command line program for reading and writing Motorola 68HC11 series microcontroller (MCU).

Example devices: MC68HC11E1 MC68HC11E9 MC68HC711E9 MC68HC11E20 MC68HC711E20 MC68HC811E2

The MCU must start in the bootstrap mode with an 8MHz crystal. The mode can be selected by connecting MODA + MODB pins to ground.

In bootstrap mode, the built-in bootloader program in the ROM will execute, which then waits for the host to send it a user program to place into RAM, and then executes it by jumping to RAM address 0x0000.

68HC11 standard, from the project README
From the project README

Main components on the 68HC11 standard

68HC11_PLCC52

68HC11 standard bill of materials (BOM)

16 components, 11 distinct parts.

QtyPartRefs
1
68HC11_PLCC52
U1
1
8MHz
Y1
1
Conn_01x05
J1
1
Mode select
SW1
1
Reset
SW2
1
EPROM_VPPE (+12V)
SW3
2
22pF
C1, C2
2
100nF
C3, C4
1
10M
R1
1
4.7K
R2
4
10K
R3, R4, R5, R6

68HC11 standard design files

The KiCad project lives in the truhy/Tru11 repository on GitHub; these links point at the commit this page was built from.

68HC11 standard: common questions

How big is the 68HC11 standard PCB?

The 68HC11 standard measures 78 × 87.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 68HC11 standard?

16 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the 68HC11 standard design files?

From the truhy/Tru11 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 68HC11 standard design in my own project?

Yes, under the terms of its MIT license, which truhy chose for the repository.

More boards in Tru11

Similar boards