TSM32Demo
TSGBouts·TSM32Demo
About the TSM32Demo PCB
TSM32Demo is an open source STM32 PCB design by TSGBouts, published on GitHub. It is a 2-layer board measuring 41 × 30 mm, with 28 components from 16 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
STM32 Practice Board – KiCad Project This repository contains a two‑layer STM32 “Blue‑Pill” style development board designed in KiCad as part of my self‑learning journey. The schematic capture, component selection, PCB layout, routing and manufacturing file generation were all co
STM32 Practice Board – KiCad Project This repository contains a two‑layer STM32 “Blue‑Pill” style development board designed in KiCad as part of my self‑learning journey. The schematic capture, component selection, PCB layout, routing and manufacturing file generation were all completed by following the step‑by‑step guide in Phil Salmony’s YouTube video: KiCad 6 STM32 PCB Design — Phil’s Lab #65 While the tutorial was recorded in KiCad 6, this project was created with KiCad 9.0; the file formats are fully forward‑compatible. _____________________________________ What’s on the board? Block…
Main components on the TSM32Demo
TSM32Demo bill of materials (BOM)
28 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 16mHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 5 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C9 |
| 1 | 10u | C_0603_1608Metric | C5 |
| 1 | 10n | C_0402_1005Metric | C6 |
| 2 | 1u | C_0402_1005Metric | C7, C8 |
| 2 | 10p | C_0402_1005Metric | C10, C11 |
| 2 | 22u | C_0805_2012Metric | C12, C13 |
| 1 | 10k | R_0402_1005Metric | R1 |
| 4 | 1k5 | R_0402_1005Metric | R2, R3, R4, R5 |
TSM32Demo design files
The KiCad project lives in the TSGBouts/TSM32Demo repository on GitHub; these links point at the commit this page was built from.
- Layouttest.kicad_pcb
- Schematictest.kicad_sch
TSM32Demo: common questions
What microcontroller does the TSM32Demo use?
The TSM32Demo is built around the STM32F103C8T6, from the STM32 family.
How big is the TSM32Demo PCB?
The TSM32Demo measures 41 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TSM32Demo?
28 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the TSM32Demo design files?
From the TSGBouts/TSM32Demo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TSM32Demo design in my own project?
The repository has no license, so all rights stay with TSGBouts. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TSM32Demo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k