Fcard

TTF-fog·fcard

Fcard PCB layout, top view — open source AVR/Arduino board by TTF-fog

About the Fcard PCB

Fcard is an open source AVR/Arduino PCB design by TTF-fog, published on GitHub. It is a 2-layer board measuring 32.7 × 12 mm, with 11 components from 5 distinct parts.

Its main chip is the ATTINY85-20S, from the AVR/Arduino family. By type, the board carries 7 diodes, 2 connectors, 1 IC and 1 capacitor.

From the project

BoM,gerbers all in jlcpcb/production_files

Fcard, from the project README
From the project README

Main components on the Fcard

Fcard bill of materials (BOM)

11 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY85-20S
ATtiny85-20S
U1
1
CONN_01X02
Conn_01x02
J1
1
USB_B
J3
7
LED
D1, D2, D3, D5, D6, D7, D8
1
10UF
10uF
C1

Fcard design files

The KiCad project lives in the TTF-fog/fcard repository on GitHub; these links point at the commit this page was built from.

Fcard: common questions

What microcontroller does the Fcard use?

The Fcard is built around the ATTINY85-20S, from the AVR/Arduino family.

How big is the Fcard PCB?

The Fcard measures 32.7 × 12 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fcard?

11 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fcard design files?

From the TTF-fog/fcard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fcard design in my own project?

The repository has no license, so all rights stay with TTF-fog. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fcard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards