Flash
TTF-fog·ULTRASprig·Expansions/FlashBreakout/Flash.kicad_pcb
About the Flash PCB
Flash is an open source PCB design by TTF-fog, published on GitHub. It is a 2-layer board measuring 15.6 × 21.3 mm, with 6 components from 6 distinct parts.
Other key parts include the W25Q128JVS. By type, the board carries 2 resistors, 1 IC, 1 connector, 1 diode and 1 capacitor.
From the project
an updated version of the Sprig, made to be ultra-modular and expansible!

Main components on the Flash
Flash bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 100NF 100nF | C_0402_1005Metric | C1 |
| 1 | 0 | R_0402_1005Metric | R1 |
| 1 | 1K | R_0402_1005Metric | R2 |
Flash design files
The KiCad project lives in the TTF-fog/ULTRASprig repository on GitHub; these links point at the commit this page was built from.
Flash: common questions
How big is the Flash PCB?
The Flash measures 15.6 × 21.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flash?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flash design files?
From the TTF-fog/ULTRASprig repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flash design in my own project?
The repository has no license, so all rights stay with TTF-fog. Use it as a reference, and ask the author before reusing the design.