ULTRASprig
TTF-fog·ULTRASprig·core_board/RP2354B/ULTRASprig.kicad_pcb
About the ULTRASprig PCB
ULTRASprig is an open source Raspberry Pi PCB design by TTF-fog, published on GitHub. It is a 2-layer board measuring 34.1 × 53.9 mm, with 47 components from 29 distinct parts.
Its main chip is the RP2354B, from the Raspberry Pi family. Other key parts include the USBLC6-2P6, BQ24230RGT and TPS62130A. By type, the board carries 21 capacitors, 13 resistors, 6 connectors, 4 ICs, 2 inductors and 1 crystal.
It belongs with the power & battery designs in this gallery.
From the project
an updated version of the Sprig, made to be ultra-modular and expansible!

Main components on the ULTRASprig
ULTRASprig bill of materials (BOM)
47 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2354B | QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | USBLC6-2P6 | SOT-666 | U2 |
| 1 | BQ24230RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U3 |
| 1 | TPS62130A | VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U4 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | CONN_01X12_PIN Conn_01x12_Pin | PinSocket_1x12_P2.54mm_Vertical | J4 |
| 2 | CONN_01X10_PIN Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J6, J10 |
| 1 | 3.3U 3.3u | L_0402_1005Metric | L1 |
| 1 | C49067 L | L_0402_1005Metric | L2 |
| 2 | 15PF 15pF | C_0402_1005Metric | C1, C2 |
| 2 | 1UF 1uF | C_0402_1005Metric | C3, C20 |
| 6 | 4.7UF 4.7uF | C_0402_1005Metric | C4, C5, C6, C8, C9, C10 |
| 7 | 100NF 100nF | C_0402_1005Metric | C7, C11, C12, C13, C14, C18, C19 |
| 1 | 22UF 22uF | C_0402_1005Metric | C21 |
| 1 | 10UF 10uF | C_0402_1005Metric | C22 |
| 1 | 3.3NF 3.3nF | C_0402_1005Metric | C23 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric | C24 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22 | R_0402_1005Metric | R1, R2 |
| 3 | 1K | R_0402_1005Metric | R4, R8, R9 |
| 2 | 5.1K | R_0402_1005Metric | R5, R7 |
| 1 | 33 | R_0402_1005Metric | R6 |
| 1 | 3K | R_0402_1005Metric | R10 |
| 1 | 4.4K | R_0402_1005Metric | R11 |
| 1 | 8K | R_0603_1608Metric | R12 |
| 1 | 25K | R_0603_1608Metric | R13 |
| 1 | 100K | R_0402_1005Metric | R14 |
ULTRASprig design files
The KiCad project lives in the TTF-fog/ULTRASprig repository on GitHub; these links point at the commit this page was built from.
ULTRASprig: common questions
What microcontroller does the ULTRASprig use?
The ULTRASprig is built around the RP2354B, from the Raspberry Pi family.
How big is the ULTRASprig PCB?
The ULTRASprig measures 34.1 × 53.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ULTRASprig?
47 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ULTRASprig design files?
From the TTF-fog/ULTRASprig repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ULTRASprig design in my own project?
The repository has no license, so all rights stay with TTF-fog. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ULTRASprig without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in ULTRASprig
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507