LED Panel Hex
Tynogc·PickAndPlace_Electronic·LichtDom_SidePanels/LED_Panel_Hex.kicad_pcb
About the LED Panel Hex PCB
LED Panel Hex is an open source PCB design by Tynogc, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 39 × 55.5 mm, with 52 components from 7 distinct parts.
By type, the board carries 36 diodes, 10 resistors, 4 transistors and 2 connectors.
From the project
The Electronic-Side of an automatic SMT Pick&Place-System
Leiterplatten und embedded-Software für den Pick&Place Automaten
zur Verwendung dieses Repos sind noch die folgenden Repositorys nötig: https://github.com/Virtex7/PhilippsKicadBauteile https://github.com/ep092/library_toni.pretty
Diese enthalten KiCAD-Bauteile und Schaltplansymbole
LED Panel Hex bill of materials (BOM)
52 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Q_NPN_BEC | SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | CONN_02X02 | micro_match3x2 | P1, P2 |
| 18 | RED | LED_PLCC-2 | D1, D3, D5, D7, D9, D11, D13, D15 +10 |
| 18 | GREEN | LED_PLCC-2 | D2, D4, D6, D8, D10, D12, D14, D16 +10 |
| 3 | 570 | R_1206 | R1, R3, R5 |
| 3 | 270 | R_0805 | R2, R4, R6 |
| 4 | R | R_0805 | R7, R8, R9, R10 |
LED Panel Hex design files
The KiCad project lives in the Tynogc/PickAndPlace_Electronic repository on GitHub; these links point at the commit this page was built from.
LED Panel Hex: common questions
How big is the LED Panel Hex PCB?
The LED Panel Hex measures 39 × 55.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED Panel Hex?
52 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED Panel Hex design files?
From the Tynogc/PickAndPlace_Electronic repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LED Panel Hex design in my own project?
Yes, under the terms of its GPL-3.0 license, which Tynogc chose for the repository.
More boards in PickAndPlace_Electronic
Led
Tynogc
57.5 × 67.5 mm63 parts2LGPL-3.01STM32
Feeder Testplatine
Tynogc
40 × 64 mm48 parts2LGPL-3.01Raspberry Pi
DomController
Tynogc
56 × 90 mm41 parts2LGPL-3.01LED Panel Flat
Tynogc
50 × 50 mm37 parts2LGPL-3.01AVR/Arduino
Gabel
Tynogc
33 × 72 mm35 parts2LGPL-3.01LED Panel Hex schraeg
Tynogc
18 × 55.5 mm33 parts2LGPL-3.01LED Panel Hex gerade
Tynogc
18 × 50.8 mm19 parts2LGPL-3.01