HardLabs

Temp Sensor Board 1

UAlberta-EcoCar·AutomatedLoadBank·Hardware/Temperature Sensor Board/Temperature Sensor Board 1/Temp Sensor Board 1.kicad_pcb

Temp Sensor Board 1 layout, top view — open source board by UAlberta-EcoCar

About the Temp Sensor Board 1

Temp Sensor Board 1 is an open source PCB design by UAlberta-EcoCar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 41.3 × 19.9 mm, with 3 components from 3 distinct parts.

Other key parts include the Temperature_Sensor_1. By type, the board carries 1 IC and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

Automated Resistive Load Bank for Fuel Cell Testing

Set date for Wi-Fi access\ sudo date -s "Dec 27 14:54"

Update software repositories & installed software\ TUTORIAL\ sudo apt-get update\ sudo apt-get dist-upgrade

Install "Matchbox" on-screen software keyboard\ sudo apt-get install matchbox-keyboard

Install TkInter and Python image library\ sudo apt-get install tk\ sudo apt-get install python-imaging\ sudo apt-get install python-imaging-tk\ sudo apt-get install python3-pil.imagetk

Main components on the Temp Sensor Board 1

Temperature_Sensor_1

Temp Sensor Board 1 bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
Temperature_Sensor_1
U$1
1
6P6C
J1
1
R
4.7k

Temp Sensor Board 1 design files

The KiCad project lives in the UAlberta-EcoCar/AutomatedLoadBank repository on GitHub; these links point at the commit this page was built from.

Temp Sensor Board 1: common questions

How big is the Temp Sensor Board 1?

The Temp Sensor Board 1 measures 41.3 × 19.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Temp Sensor Board 1?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Temp Sensor Board 1 design files?

From the UAlberta-EcoCar/AutomatedLoadBank repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Temp Sensor Board 1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which UAlberta-EcoCar chose for the repository.

More boards in AutomatedLoadBank

Similar boards