Helmholtz driver

UBCOrbit·helmholtz_driver

Helmholtz driver PCB layout, top view — open source AVR/Arduino board by UBCOrbit

About the Helmholtz driver PCB

Helmholtz driver is an open source AVR/Arduino PCB design by UBCOrbit, published on GitHub. It is a 4-layer board measuring 114.3 × 48.3 mm, with 23 components from 8 distinct parts.

Its main chip is the ARDUINO_NANO_V3.X, from the AVR/Arduino family. Other key parts include the DRV8870DDA. By type, the board carries 6 connectors, 6 capacitors, 6 resistors, 3 ICs and 1 module.

From the project

Driver PCB for helmholtz cage

Main components on the Helmholtz driver

Helmholtz driver bill of materials (BOM)

23 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
DRV8870DDA
U1, U2, U3
1
ARDUINO_NANO_V3.X
Arduino_Nano_v3.x
A1
4
CONN_01X02
Conn_01x02
J1, J4, J5, J6
2
CONN_01X15
Conn_01x15
J2, J3
1
R_POT
RV1
3
C0603C104M5RACTU
0.1u
C1, C3, C5
3
UWT1H470MCL1GS
47u
C2, C4, C6
6
CSR1206FKR300
0.3R
R1, R2, R3, R4, R5, R6

Helmholtz driver design files

The KiCad project lives in the UBCOrbit/helmholtz_driver repository on GitHub; these links point at the commit this page was built from.

Helmholtz driver: common questions

What microcontroller does the Helmholtz driver use?

The Helmholtz driver is built around the ARDUINO_NANO_V3.X, from the AVR/Arduino family.

How big is the Helmholtz driver PCB?

The Helmholtz driver measures 114.3 × 48.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Helmholtz driver?

23 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Helmholtz driver design files?

From the UBCOrbit/helmholtz_driver repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Helmholtz driver design in my own project?

The repository has no license, so all rights stay with UBCOrbit. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Helmholtz driver without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards