ADC ECU Board
UC-Aerospace·Hybrid25_ECU·Boards/ADC_Board/ADC_Board.kicad_pcb
About the ADC ECU Board
ADC ECU Board is an open source STM32 PCB design by UC-Aerospace, published on GitHub. It is a 4-layer board measuring 100 × 50 mm, with 136 components from 59 distinct parts.
Its main chip is the STM32G0B1RCT6, from the STM32 family. Other key parts include the TCAN1046AVDYYRQ1, AZ1117CH-3.3TRG1, AZ1117CH-5.0TRG1 and ADS124S08IRHBR. By type, the board carries 58 resistors, 42 capacitors, 18 connectors, 7 diodes, 5 ICs and 2 fuses.
From the project
This repo contains the hardware and firmware for the 2025 Hybrid Rocket Engine FYP test stand electronics.
This repo contains the hardware and firmware for the 2025 Hybrid Rocket Engine FYP test stand electronics.
The hardware consists of three seperate modules, the central ECU alongside a servo and ADC peripheral. Central to peripheral communication uses CAN-FD and is designed to be modular, while communications to a remote interface unit is done over RS422. For more information on the RIU it can be found here.
Main components on the ADC ECU Board
ADC ECU Board bill of materials (BOM)
136 components, 59 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G0B1RCT6 STM32G0B1RCTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TCAN1046AVDYYRQ1 TCAN1046 | SOT23_DYY_TEX | U2 |
| 1 | AZ1117CH-3.3TRG1 AZ1117C-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | AZ1117CH-5.0TRG1 AZ1117C-5.0 | SOT-223-3_TabPin2 | U4 |
| 1 | ADS124S08IRHBR | QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U5 |
| 1 | DMP6023LFG-7 DMP6023LFG | Diodes_PowerDI3333-8 | Q1 |
| 1 | B4B-PH-K-S SWD JST PH | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | B3B-PH-K-S UART JST | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2 |
| 1 | B7B-PH-K-S Extras JST | JST_PH_B7B-PH-K_1x07_P2.00mm_Vertical | J3 |
| 1 | 10118193-0001LF USB_B_Micro | USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J4 |
| 1 | B6B-PH-K-S I2CA JST | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J5 |
| 1 | B5B-PH-K-S I2CB JST | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J7 |
| 1 | B5B-PH-K-S I2CC JST | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J10 |
| 1 | 436500315 Backup Power | Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J12 |
| 1 | Load Cell A | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J13 |
| 1 | Load Cell B | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J14 |
| 1 | MIPA_A | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J15 |
| 1 | Load Cell C | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J16 |
| 1 | MIPA_B | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J17 |
| 1 | Thermocouple A | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J18 |
Show 39 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIPA_C | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J19 |
| 1 | Thermocouple B | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J20 |
| 1 | Thermocouple C | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J21 |
| 1 | Cold Juntion Thermistor | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J22 |
| 2 | 2A | Fuse_1206_3216Metric | F1, F2 |
| 2 | GND | TestPoint_Bridge_Pitch2.54mm_Drill1.3mm | TP19, TP20 |
| 2 | PESD3V3L4UW | SOT-665 | D1, D2 |
| 1 | MM3Z18VB 18V | D_SOD-323F | D3 |
| 1 | SMF9.0CA 9V 15.4VC | D_SOD-123F | D4 |
| 1 | LTST-C150KRKT LED_R | LED_1206_3216Metric | D5 |
| 1 | LTST-C150KGKT LED_G | LED_1206_3216Metric | D6 |
| 1 | LTST-C150TBKT LED_B | LED_1206_3216Metric | D7 |
| 1 | BBUP00321611121Y00 FerriteBead | L_1206_3216Metric | FB1 |
| 3 | 100n | C_0402_1005Metric | C1, C2, C5 |
| 2 | 4u7 | C_0603_1608Metric | C3, C4 |
| 8 | 100n | C_0603_1608Metric | C8, C9, C16, C28, C32, C36, C43, C44 |
| 2 | 22u | C_1206_3216Metric | C10, C12 |
| 3 | 10u | C_0603_1608Metric | C11, C13, C15 |
| 1 | A768KS107M1HLAE030 100u | CP_Elec_8x10.5 | C14 |
| 1 | 330n | C_0603_1608Metric | C17 |
| 14 | 390p | C_0402_1005Metric | C18, C21, C22, C24, C25, C27, C29, C31 +6 |
| 1 | 1u | C_0603_1608Metric | C19 |
| 7 | 3n9 | C_0402_1005Metric | C20, C23, C26, C30, C34, C38, C41 |
| 2 | 27R | R_0603_1608Metric | R4, R5 |
| 2 | 120R | R_0603_1608Metric | R6, R8 |
| 5 | 100K | R_0603_1608Metric | R7, R9, R10, R11, R16 |
| 1 | 14K3 | R_0603_1608Metric | R12 |
| 1 | 549R | R_0603_1608Metric | R13 |
| 2 | 220R | R_0603_1608Metric | R14, R15 |
| 1 | 9K53 | R_0603_1608Metric | R17 |
| 1 | 2R | R_0603_1608Metric | R18 |
| 14 | 2K | R_0402_1005Metric | R19, R20, R21, R23, R25, R28, R31, R34 +6 |
| 7 | 47R | R_0603_1608Metric | R22, R24, R26, R27, R30, R32, R33 |
| 4 | 3K | R_0603_1608Metric | R29, R35, R40, R60 |
| 6 | 1M | R_0402_1005Metric | R36, R39, R41, R44, R45, R50 |
| 1 | 20K | R_0603_1608Metric | R46 |
| 1 | 2K | R_0603_1608Metric | R48 |
| 6 | 10K | R_0603_1608Metric | R51, R52, R53, R54, R55, R56 |
| 4 | 5K90 | R_0603_1608Metric | R57, R58, R59, R61 |
ADC ECU Board design files
The KiCad project lives in the UC-Aerospace/Hybrid25_ECU repository on GitHub; these links point at the commit this page was built from.
ADC ECU Board: common questions
What microcontroller does the ADC ECU Board use?
The ADC ECU Board is built around the STM32G0B1RCT6, from the STM32 family.
How big is the ADC ECU Board?
The ADC ECU Board measures 100 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ADC ECU Board?
136 components, from 59 distinct parts. The full bill of materials is listed on this page.
Where can I download the ADC ECU Board design files?
From the UC-Aerospace/Hybrid25_ECU repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ADC ECU Board design in my own project?
The repository has no license, so all rights stay with UC-Aerospace. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ADC ECU Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Hybrid25_ECU
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k