Maveric bringup
ucb-bar·maveric-bringup·maveric-board/maveric-board.kicad_pcb
About the Maveric bringup PCB
Maveric bringup is an open source PCB design by ucb-bar, published on GitHub. It is a 6-layer board measuring 157 × 76 mm, with 123 components from 23 distinct parts.
Other key parts include the C131978 and Testchip socket. By type, the board carries 36 capacitors, 36 resistors, 20 connectors, 17 test points, 5 transistors and 5 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
- 7/12 5pm: submitted order - 7/12 7pm: review done - 7/12 8pm: production files sent, confirmed - 7/14 2am: parts placement sent, confirmed - 7/18 7pm: board fab done - 7/20 1am: board assembly done - 7/21 8pm: shipped - 7/23 2pm: delivered to BWRC - Collaterals from JLCPCB are
- 7/12 5pm: submitted order - 7/12 7pm: review done - 7/12 8pm: production files sent, confirmed - 7/14 2am: parts placement sent, confirmed - 7/18 7pm: board fab done - 7/20 1am: board assembly done - 7/21 8pm: shipped - 7/23 2pm: delivered to BWRC - Collaterals from JLCPCB are in maveric-board/07222024-jlcpcb
- Things to consider: cost, FPGA type, host interface, DRAM, connector + voltages, form factor - Desires - Low cost (< $3k) - Small FPGA (fast bitstream generation and programming) - High bandwidth host interface (but NO PCIe / Ethernet, UART is OK but USB-FIFO is ideal) - Some DRAM…

Main components on the Maveric bringup
Maveric bringup bill of materials (BOM)
123 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C131978 Level shifter | SN74AVC1T45DBVR | U1, U2 |
| 1 | Testchip socket | BGA-1733-.92-47.725x47.725 | U3 |
| 5 | C260950 NMOS | SOT95P240X120-3N | Q1, Q2, Q3, Q4, Q5 |
| 1 | C7437322 Banana jack (black) | 24.243.2_Black_Banana_Jack | J1 |
| 2 | C7437321 Banana jack (red) | 24.243.1_Red_Banana_Jack | J2, J3 |
| 8 | C598608 3-pin header | AMPHENOL_68001-103HLF | J4, J5, J6, J8, J9, J18, J19, J20 |
| 4 | C482015 SMA jack | 5-1814832-2 | J7, J11, J15, J16 |
| 3 | C464650 20-pin header | AMPHENOL_67996-220HLF | J10, J12, J14 |
| 1 | C2833720 6-pin female header | HDR-TH_6P-P2.54-H-F-W5.7 | J13 |
| 1 | C2830435 FMC LPC terminal | SAMTEC_ASP-134604-01 | J17 |
| 1 | C720381 Push button switch | SW-SMD_L6.1-W3.6-LS7.9 | SW1 |
| 8 | C5199800 SMD testpoint | TESTPOINT-SMD_L3.8-W2.0_RH-5019 | TP1, TP2, TP6, TP7, TP8, TP9, TP15, TP16 |
| 9 | TestPoint_Probe | TP-60X60_SQ-SMT | TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14 +1 |
| 5 | C5569446 LED | APT2012LZGCK | D1, D2, D3, D4, D5 |
| 6 | C15008 100u | C_1206_3216Metric | C1, C2, C3, C4, C5, C6 |
| 6 | C14663 100n | C_0603_1608Metric | C7, C8, C9, C10, C11, C36 |
| 24 | C19702 10u | C_0603_1608Metric | C12, C13, C14, C15, C16, C17, C18, C19 +16 |
| 1 | C23185 49.9Ω | R_0603_1608Metric | R1 |
| 1 | C21190 1k | R_0603_1608Metric | R2 |
| 18 | C21189 0Ω | R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10 +10 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | C25803 100kΩ | R_0603_1608Metric | R17, R19, R21, R23, R25 |
| 5 | C22775 100Ω | R_0603_1608Metric | R18, R20, R22, R24, R26 |
| 6 | C23162 4.7k | R_0603_1608Metric | R31, R32, R33, R34, R35, R36 |
Maveric bringup design files
The KiCad project lives in the ucb-bar/maveric-bringup repository on GitHub; these links point at the commit this page was built from.
Maveric bringup: common questions
How big is the Maveric bringup PCB?
The Maveric bringup measures 157 × 76 mm, has 6 copper layers and is 1.9524 mm thick.
How many components are on the Maveric bringup?
123 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Maveric bringup design files?
From the ucb-bar/maveric-bringup repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Maveric bringup design in my own project?
The repository has no license, so all rights stay with ucb-bar. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389