Power-Board-1
UCR-UAS·Power-Board-1
About the Power-Board-1
Power-Board-1 is an open source PCB design by UCR-UAS, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 60 mm, with 52 components from 34 distinct parts.
Other key parts include the LM5117*PM*. By type, the board carries 17 capacitors, 15 resistors, 9 connectors, 6 diodes, 2 transistors and 1 IC.
It belongs with the power & battery and test & measurement designs in this gallery.
From the project
12S LiPo to 19V 12A power management board based on the LM5117 from Texas Instruments
Yellow-Brick-Laptop-Charger ===========================
Because why not charge your laptop from a giant, scary yellow brick lipo?
Design Specifics ---------------- The most important things (the soft start and such are all set to the Ti reference values) are the UVLO and output voltage divider.
The UVLO circuit is set to around 36V (3.0V per cell in a 12S configuration). It is noted that paranoid users can use a 10S lipo (which would cut off at around 3.6V per cell).
Main components on the Power-Board-1
Power-Board-1 bill of materials (BOM)
52 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM5117*PM* | SSOP-20-1EP_4.4x6.5mm_Pitch0.65mm | U1 |
| 2 | MOS_N | PQFN-8-GDS_IRF_B_5mmx6mm | Q1, Q2 |
| 7 | TST | TP | P1, P2, P3, P4, P5, P6, P7 |
| 1 | Battery 1 | BIG_CONN | P8 |
| 1 | Power Out | BIG_CONN | P10 |
| 1 | 20A | PC_Auto_Fuse_Holder | F1 |
| 3 | DIODESCH | Diode-SMB_Standard | D1, D3, D4 |
| 1 | IN_Y | LED-0805 | D2 |
| 1 | ZENER 7.5V | Diode-SMB_Standard | D5 |
| 1 | OUT_B | LED-0805 | D6 |
| 1 | 10uH | Toroidal | L1 |
| 1 | 47pF | C_0805 | C1 |
| 7 | 1uF | C_1206 | C2, C8, C9, C10, C12, C15, C16 |
| 2 | 100nF | C_0805 | C3, C4 |
| 1 | 820pF | C_0805 | C5 |
| 1 | 5.1nF | C_0805 | C6 |
| 1 | 68pF | C_0805 | C7 |
| 1 | 100uF | c_elec_10x10 | C11 |
| 1 | 420pF | C_0805 | C13 |
| 1 | 100uF | c_elec_6.3x7.7 | C17 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NU | C_0805 | C18 |
| 1 | 100K | R_0805 | R1 |
| 1 | 3.57K | R_0805 | R2 |
| 1 | 20K | R_0805 | R3 |
| 1 | 3.9 | R_0805 | R4 |
| 1 | 31.6K | R_0805 | R5 |
| 1 | 137K | R_0805 | R6 |
| 1 | 8mohm | R_2512 | R7 |
| 1 | 10 | R_0805 | R8 |
| 1 | 22.1K | R_0805 | R9 |
| 1 | 976 | R_0805 | R10 |
| 3 | 0 | R_0805 | R11, R12, R13 |
| 1 | 5.1k | R_0805 | R14 |
| 1 | 2k | R_0805 | R15 |
Power-Board-1 design files
The KiCad project lives in the UCR-UAS/Power-Board-1 repository on GitHub; these links point at the commit this page was built from.
Power-Board-1: common questions
How big is the Power-Board-1?
The Power-Board-1 measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power-Board-1?
52 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power-Board-1 design files?
From the UCR-UAS/Power-Board-1 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Power-Board-1 design in my own project?
Yes, under the terms of its MIT license, which UCR-UAS chose for the repository.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k