Tandem devkit
uFahrrad·tandem-devkit
About the Tandem devkit PCB
Tandem devkit is an open source PCB design by uFahrrad, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 95.4 × 82.9 mm, with 77 components from 32 distinct parts.
Other key parts include the AMS1117-ADJ_SOT223. By type, the board carries 35 resistors, 16 capacitors, 13 diodes, 6 connectors, 3 transistors and 3 inductors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware files for feather based bike computer devkit -- Mirror of https://codeberg.org/uFahrrad/tandem-devkit
Main components on the Tandem devkit
Tandem devkit bill of materials (BOM)
77 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-ADJ_SOT223 | SOT-223-3_TabPin2 | U201 |
| 2 | 2N7002 | SOT-23 | Q301, Q302 |
| 1 | AO3401A | SOT-23 | Q303 |
| 1 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J105 |
| 1 | QWIIC I2C Connector | JST_SHL_SM04B-SHLS-TF_1x04-1MP_P1.00mm_Horizontal | J106 |
| 1 | Conn_01x06 | powermodule | J203 |
| 1 | ConnectorLCDFrontLight | jlcpcb-C11047_FFC_1x04-1MP_P0.50mm_Horizontal | J301 |
| 1 | FPC24(0.5MM) | jlcpcb-C11057_FFC_1x24-1MP_P0.50mm_Horizontal | J302 |
| 1 | FPC10(0.5MM) | jlcpcb-C11050_FFC_1x10-1MP_P0.50mm_Horizontal | J303 |
| 1 | P6SMB6.8CA | D_SMB | D201 |
| 2 | LBZT52C7V5T1G | D_SOD-123 | D202, D203 |
| 6 | B5819W | D_SOD-123 | D204, D205, D206, D304, D305, D306 |
| 1 | BLUE | LED_0603_1608Metric | D207 |
| 3 | WHITE | LED_sidemount_C205440 | D301, D302, D303 |
| 2 | FerriteBead_Small | R_0805_2012Metric | FB301, FB302 |
| 1 | 10u/1A | L_4.0x4.0_H3 | L301 |
| 1 | 220u | CP_EIA-7343-43_Kemet-X | C201 |
| 1 | 10n | C_0603_1608Metric | C202 |
| 2 | 22u | C_1206_3216Metric | C203, C205 |
| 1 | 4.7u/50V | C_1206_3216Metric | C301 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1u | C_0603_1608Metric | C302, C307, C311 |
| 1 | 100n | C_0603_1608Metric | C303 |
| 7 | 1u/50V | C_0603_1608Metric | C304, C305, C306, C308, C309, C310, C312 |
| 17 | 22 | R_0603_1608Metric | R101, R102, R103, R104, R105, R106, R107, R108 +9 |
| 2 | 2k2 | R_0603_1608Metric | R114, R115 |
| 5 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201, R202, R205, R211, R213 |
| 5 | 0.5 | R_0805_2012Metric | R204, R210, R301, R302, R307 |
| 1 | 220k | R_0603_1608Metric | R206 |
| 2 | 100k | R_0603_1608Metric | R207, R308 |
| 1 | 39k | R_0603_1608Metric | R208 |
| 1 | 15k | R_0603_1608Metric | R209 |
| 1 | 470 | R_0603_1608Metric | R212 |
Tandem devkit design files
The KiCad project lives in the uFahrrad/tandem-devkit repository on GitHub; these links point at the commit this page was built from.
- Layouttandem-devkit.kicad_pcb
- Schematictandem-devkit.kicad_sch
Tandem devkit: common questions
How big is the Tandem devkit PCB?
The Tandem devkit measures 95.4 × 82.9 mm, has 4 copper layers and is 1.55068 mm thick.
How many components are on the Tandem devkit?
77 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tandem devkit design files?
From the uFahrrad/tandem-devkit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tandem devkit design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which uFahrrad chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979