TSAL
About the TSAL PCB
TSAL is an open source PCB design by UNCAMotorsports, published on GitHub under the MIT license. It is a 4-layer board measuring 50.8 × 25.4 mm, with 30 components from 28 distinct parts.
Other key parts include the BTS4130QGA, BTS6133D and H3LIS331DL. By type, the board carries 10 resistors, 7 capacitors, 6 ICs, 4 connectors and 2 transistors.
Main components on the TSAL
TSAL bill of materials (BOM)
30 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BTS4130QGA NCP785A_3.3v | SOT89-3_Housing | U1 |
| 1 | BTS4130QGA TL431 | SOT-23 | U2 |
| 1 | BTS6133D PS2811-1 | SSOP-4 | U3 |
| 1 | BTS6133D LM555N | SOIC8 | U4 |
| 1 | H3LIS331DL AP1117 | SOT-223 | U5 |
| 1 | BTS6133D | TO-252-5 | U6 |
| 1 | BSS84 | SOT23-3 | Q1 |
| 1 | BSS138 | SOT23-3 | Q2 |
| 1 | TS_VCC | TerminalBlock_Pheonix_PT-3.5mm_2pol | P1 |
| 1 | TSAL | TerminalBlock_Pheonix_PT-3.5mm_2pol | P2 |
| 1 | GLV | TerminalBlock_Pheonix_PT-3.5mm_2pol | P3 |
| 1 | CONN_01X02 ACC_LED | TerminalBlock_Pheonix_PT-3.5mm_2pol | P4 |
| 1 | SW_PUSH | B3U-1100P | 555_BP |
| 1 | 10UF_AL 2.2uF_350V | C_2220 | C1 |
| 1 | C_22uF_6.3V | 0805 | C2 |
| 1 | 1UF C_Small | 0805 | C3 |
| 1 | 1UF C_100nF_50V | 0805 | C4 |
| 1 | 100UF_AL 10uF_16V | 0805 | C5 |
| 1 | 1UF_AL 1uF | 0805 | C6 |
| 1 | 10UF 10uF_16V | 0805 | C7 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 4.7M | 0805 | R1 |
| 1 | 220k | 0805 | R2 |
| 1 | 10K 2k | 0805 | R3 |
| 1 | 100k | 0805 | R4 |
| 1 | 620 1k | 0805 | R5 |
| 1 | 620 10k | 0805 | R6 |
| 1 | 10K 220k | 0805 | R7 |
| 3 | 10K 1k | 0805 | R8, R9, R10 |
TSAL design files
The KiCad project lives in the UNCAMotorsports/UNCAMotorsports-2017 repository on GitHub; these links point at the commit this page was built from.
TSAL: common questions
How big is the TSAL PCB?
The TSAL measures 50.8 × 25.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TSAL?
30 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TSAL design files?
From the UNCAMotorsports/UNCAMotorsports-2017 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the TSAL design in my own project?
Yes, under the terms of its MIT license, which UNCAMotorsports chose for the repository.
More boards in UNCAMotorsports-2017
NXPVehicleControllerwut
99.1 × 57.2 mm139 parts2LMIT2
NXPVehicleController
99.1 × 57.2 mm139 parts2LMIT2
NXPEnergy Meter
45.7 × 39.6 mm33 parts2LMIT2
Bspd
52.1 × 21.5 mm29 parts2LMIT2
C-CAN Y17
68.6 × 43.2 mm28 parts2LMIT2
NXPVehicleIMU
66.8 × 33 mm26 parts2LMIT2
Shutdown circuit
36.8 × 25.8 mm16 parts2LMIT2
CAT6 Adapater
63.5 × 19.1 mm3 parts2LMIT2
Earlier revisions in the repo: tsal