VehicleControllerwut
About the VehicleControllerwut PCB
VehicleControllerwut is an open source NXP PCB design by UNCAMotorsports, published on GitHub under the MIT license. It is a 2-layer board measuring 99.1 × 57.2 mm, with 139 components from 71 distinct parts.
Its main chip is the TEENSY_3.5, from the NXP family. Other key parts include the BTS4130QGA, BTS6133D, H3LIS331DL, UltimateSensorFusion and NDC7003P. By type, the board carries 50 resistors, 22 ICs, 18 capacitors, 17 diodes, 13 connectors and 11 fuses.
Main components on the VehicleControllerwut
VehicleControllerwut bill of materials (BOM)
139 components, 71 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BTS4130QGA | SOIC20-WIDE | U1, U2 |
| 3 | BTS6133D | TO-252-5 | U3, U4, U10 |
| 1 | H3LIS331DL | LGA-16-3x3 | U5 |
| 1 | UltimateSensorFusion | UltimateSensorFusion | U6 |
| 1 | TEENSY_3.5 Teensy_3.5 | Teensy_3.5 | U7 |
| 1 | NDC7003P | SOT-23-6 | U8 |
| 1 | TL431 | SOT-23_Handsoldering | U9 |
| 1 | R-78E5.0-1.0 | R-78Cxx-1.0 | U11 |
| 1 | FGMMOPA6H | GPS_16x16 | U12 |
| 1 | U.FL_Antenna | U.FL-CON | U13 |
| 1 | NDC7002N | SOT-23-6 | U14 |
| 1 | MCP2551 | SOIC-8-N | U15 |
| 1 | RI-0505S | RI-0505S | U19 |
| 1 | ISO1540 | SOIC-8-N | U20 |
| 1 | TCMT1103 | SSOP-4 | U21 |
| 1 | OPTO-TRANSISTOR-4 | SOIC16 | U22 |
| 1 | PC_RLY | G6DN-1A | U23 |
| 1 | MCP47FEBX2 | TSSOP-8_4.4x3mm_Pitch0.65mm | U24 |
| 1 | V7805W-2000 | R-78Cxx-1.0 | U25 |
| 5 | Q_NMOS_GSD | SOT-23_Handsoldering | Q1, Q2, Q3, Q6, Q7 |
Show 51 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Q_PMOS_GSD | SOT-23_Handsoldering | Q4 |
| 1 | CONN_02X05 | Molex_NanoFit_2x05x2.50mm_Straight | J1 |
| 1 | USF_SLAVE_I2C | Pin_Header_Straight_1x03 | J2 |
| 1 | I2C_0 | Pin_Header_Straight_1x03 | J5 |
| 1 | I2C_1 | Pin_Header_Straight_1x03 | J6 |
| 1 | CAN_SER | Pin_Header_Straight_1x03 | J7 |
| 1 | CONN_01X03 | Pin_Header_Straight_1x03 | J8 |
| 2 | CONN_01X12 | Molex_NanoFit_2x06x2.50mm_Straight | J9, J10 |
| 1 | RPI_PWR | Molex_NanoFit_1x02x2.50mm_Straight | J11 |
| 2 | OUTPUTS | Molex_NanoFit_2x04x2.50mm_Straight | P1, P2 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | P4 |
| 1 | CONN_02X04 | Molex_NanoFit_2x04x2.50mm_Straight | P5 |
| 1 | TEST | Measurement_Point_Round-SMD-Pad_Big | +5v |
| 1 | CR1220 | BATT_CR1220 | BT1 |
| 9 | 3A | R_1210_HandSoldering | F1, F2, F3, F4, F5, F6, F7, F8 +1 |
| 1 | 5A | R_1210_HandSoldering | F9 |
| 1 | 2A | R_1210_HandSoldering | F11 |
| 3 | 3.3V | SOD-323 | D1, D2, D7 |
| 1 | SCL0 | LED-0805 | D3 |
| 1 | SDA0 | LED-0805 | D4 |
| 1 | D_Schottky | SMA_Handsoldering | D5 |
| 1 | D_ALT | SMA_Handsoldering | D6 |
| 1 | 12V_STATUS 12V_Status | LED-0805 | D8 |
| 1 | 5V_STATUS 5V_Status | LED-0805 | D9 |
| 1 | 3DFIX 3DFix | LED-0805 | D10 |
| 1 | CANRX | LED-0805 | D11 |
| 1 | CANTX | LED-0805 | D12 |
| 1 | D | SMA_Handsoldering | D14 |
| 2 | 1N4001 | SMA_Handsoldering | D15, D18 |
| 1 | 5V_ISO | LED-0805 | D19 |
| 1 | RPI_PWR | LED_0805 | D20 |
| 1 | 10UF_AL 10uF_Al | c_elec_5x5.8 | C1 |
| 1 | 100nF | C_0805_HandSoldering | C2 |
| 6 | 1UF 1uF | C_0805_HandSoldering | C3, C4, C12, C13, C16, C17 |
| 1 | 100UF_AL 100uF_Al | c_elec_6.3x7.7 | C5 |
| 1 | 1UF_AL 1uF_Al | C_0805_HandSoldering | C6 |
| 4 | 10UF 10uF | C_0805_HandSoldering | C7, C8, C14, C15 |
| 1 | 10UF 10u | C_0805_HandSoldering | C9 |
| 2 | 0.1UF 0.1uF | C_0805_HandSoldering | C10, C11 |
| 1 | 22UF 22u | C_0805_HandSoldering | C18 |
| 20 | 10K 10k | R_0805_HandSoldering | R1, R3, R7, R8, R9, R10, R11, R12 +12 |
| 3 | 0R | R_0805_HandSoldering | R2, R4, R26 |
| 3 | 620 | R_0805_HandSoldering | R5, R6, R27 |
| 2 | 2.2K 2.2k | R_0805_HandSoldering | R20, R28 |
| 5 | 220 | R_0805_HandSoldering | R22, R23, R30, R33, R34 |
| 1 | 330K 330k | R_0805_HandSoldering | R24 |
| 1 | 120K 120k | R_0805_HandSoldering | R25 |
| 4 | 470 | R_0805_HandSoldering | R29, R39, R48, R51 |
| 1 | 120 | R_0805_HandSoldering | R32 |
| 8 | 4.7K 4.7k | R_0805_HandSoldering | R37, R38, R42, R43, R44, R45, R46, R47 |
| 2 | DNP | R_0805_HandSoldering | R49, R50 |
VehicleControllerwut design files
The KiCad project lives in the UNCAMotorsports/UNCAMotorsports-2017 repository on GitHub; these links point at the commit this page was built from.
VehicleControllerwut: common questions
What microcontroller does the VehicleControllerwut use?
The VehicleControllerwut is built around the TEENSY_3.5, from the NXP family.
How big is the VehicleControllerwut PCB?
The VehicleControllerwut measures 99.1 × 57.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VehicleControllerwut?
139 components, from 71 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VehicleControllerwut design files?
From the UNCAMotorsports/UNCAMotorsports-2017 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the VehicleControllerwut design in my own project?
Yes, under the terms of its MIT license, which UNCAMotorsports chose for the repository.
Can I test firmware for the VehicleControllerwut without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in UNCAMotorsports-2017
NXPVehicleController
99.1 × 57.2 mm139 parts2LMIT2
NXPEnergy Meter
45.7 × 39.6 mm33 parts2LMIT2
TSAL
50.8 × 25.4 mm30 parts4LMIT2
Bspd
52.1 × 21.5 mm29 parts2LMIT2
C-CAN Y17
68.6 × 43.2 mm28 parts2LMIT2
NXPVehicleIMU
66.8 × 33 mm26 parts2LMIT2
Shutdown circuit
36.8 × 25.8 mm16 parts2LMIT2
CAT6 Adapater
63.5 × 19.1 mm3 parts2LMIT2
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532