Power Regulator 12.6v input
unl-rocketry·SlotBox-PCB·PCB/Power_Regulator_12.6v_input/Power_Regulator_12.6v_input.kicad_pcb
About the Power Regulator 12.6v input PCB
Power Regulator 12.6v input is an open source PCB design by unl-rocketry, published on GitHub. It is a 2-layer board measuring 90 × 83.5 mm, with 56 components from 37 distinct parts.
Other key parts include the TLP3542, TPS55340RTER, TPS563203 and TPS54JA20RWWR. By type, the board carries 29 capacitors, 15 resistors, 4 ICs, 3 connectors, 3 inductors and 1 switch.
Main components on the Power Regulator 12.6v input
Power Regulator 12.6v input bill of materials (BOM)
56 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLP3542 | DIP-5-6_W7.62mm | U1 |
| 1 | TPS55340RTER | RTE0016C_NV | U2 |
| 1 | TPS563203 | SOT-563 | U3 |
| 1 | TPS54JA20RWWR | RWW0021A | U4 |
| 1 | SE2-30 | SE2-30 | J1 |
| 1 | Jack-DC | AMASS_XT60-M_1x02_P7.20mm_Vertical | J2 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | B540C-13-F | SMC_DIO | CR1 |
| 1 | SW_SPDT_321 | SS-5 | SW1 |
| 1 | L8.2uH | L_0603_1608Metric | L2 |
| 1 | SPRH125-4R7N | L_12x12mm_H6mm | L3 |
| 1 | L1uH | L_0603_1608Metric | L4 |
| 1 | C10uF | C_0603_1608Metric | C3 |
| 3 | C100nF | C_0603_1608Metric | C8, C16, C23 |
| 6 | C4.7uF | C_0603_1608Metric | C9, C19, C25, C26, C30, C31 |
| 1 | 100nF | C_0603_1608Metric | C10 |
| 1 | 10u | C_0603_1608Metric | C11 |
| 2 | 100n | C_0603_1608Metric | C12, C13 |
| 3 | 22uF | C_0603_1608Metric | C14, C34, C35 |
| 1 | C1.8nF | C_0603_1608Metric | C15 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C27nF | C_0603_1608Metric | C17 |
| 5 | C1uF | C_0603_1608Metric | C18, C20, C27, C28, C32 |
| 1 | C2.2uF | C_0603_1608Metric | C21 |
| 1 | C82nF | C_0603_1608Metric | C22 |
| 2 | C100uf | C_1206_3216Metric | C24, C29 |
| 1 | C22pf | C_0603_1608Metric | C33 |
| 1 | R100k | R_0603_1608Metric | R1 |
| 1 | R220 | R_0603_1608Metric | R3 |
| 4 | R10k | R_0603_1608Metric | R4, R15, R18, R22 |
| 1 | R187k | R_0603_1608Metric | R9 |
| 1 | 135k | R_0603_1608Metric | R10 |
| 1 | 30k | R_0603_1608Metric | R11 |
| 2 | R47.5k | R_0603_1608Metric | R13, R16 |
| 1 | R1.54k | R_0603_1608Metric | R14 |
| 1 | R30.1k | R_0603_1608Metric | R19 |
| 1 | R4.87k | R_0603_1608Metric | R20 |
| 1 | R45.3k | R_0603_1608Metric | R21 |
Power Regulator 12.6v input design files
The KiCad project lives in the unl-rocketry/SlotBox-PCB repository on GitHub; these links point at the commit this page was built from.
Power Regulator 12.6v input: common questions
How big is the Power Regulator 12.6v input PCB?
The Power Regulator 12.6v input measures 90 × 83.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Regulator 12.6v input?
56 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power Regulator 12.6v input design files?
From the unl-rocketry/SlotBox-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power Regulator 12.6v input design in my own project?
The repository has no license, so all rights stay with unl-rocketry. Use it as a reference, and ask the author before reusing the design.