Sensor Board
unl-rocketry·SlotBox-PCB·PCB/Sensor_Board/Sensor_Board.kicad_pcb
About the Sensor Board
Sensor Board is an open source PCB design by unl-rocketry, published on GitHub. It is a 2-layer board measuring 90 × 83.5 mm, with 6 components from 6 distinct parts.
It belongs with the sensors designs in this gallery.
Sensor Board bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Socket | PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x09_Socket | PinSocket_1x09_P2.54mm_Vertical | J5 |
| 1 | SE2-30 | SE2-30 | J6 |
Sensor Board design files
The KiCad project lives in the unl-rocketry/SlotBox-PCB repository on GitHub; these links point at the commit this page was built from.
Sensor Board: common questions
How big is the Sensor Board?
The Sensor Board measures 90 × 83.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor Board?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor Board design files?
From the unl-rocketry/SlotBox-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensor Board design in my own project?
The repository has no license, so all rights stay with unl-rocketry. Use it as a reference, and ask the author before reusing the design.
More boards in SlotBox-PCB
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956