STM-32-PCB-Design

Unmolsharma·STM-32-PCB-Design

STM-32-PCB-Design layout, top view — open source STM32 board by Unmolsharma

About the STM-32-PCB-Design

STM-32-PCB-Design is an open source STM32 PCB design by Unmolsharma, published on GitHub. It is a 2-layer board measuring 48 × 36 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Designed a schematic and layout of a 'black-pill' STM32-based PCB including USB on KICAD 10.0

A two layer development board built around the STM32F103C8T6, with USB Micro-B input, onboard 3.3 V regulation, a 16 MHz crystal, and breakout headers for SWD, UART, and I2C. Designed in KiCad 10.

Layers 2 (1 oz copper) Board thickness 1.6 mm Microcontroller STM32F103C8T6, LQFP-48 Supply input USB Micro-B, 5 V Regulation AMS1117-3.3 LDO, SOT-223 Clock 16 MHz crystal, 3225 4-pin, 10 pF load caps Passive size 0402 signal and decoupling, 0805 bulk Programming SWD (SWDIO / SWCLK / NRST) Exposed interfaces USART1TX, USART2TX, I2C2SCL, I2C2SDA Design rules

Main components on the STM-32-PCB-Design

STM-32-PCB-Design bill of materials (BOM)

28 components, 16 distinct parts.

QtyPartRefs
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
16 MGHZ
Y1
1
USB_B_Micro
J1
3
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
RED
D1
1
120R
FB1
5
100n
C1, C2, C3, C4, C9
1
10u
C5
1
10n
C6
2
1u
C7, C8
2
10p
C10, C11
2
22u
C12, C13
1
10k
R1
4
1k5
R2, R3, R4, R5

STM-32-PCB-Design design files

The KiCad project lives in the Unmolsharma/STM-32-PCB-Design repository on GitHub; these links point at the commit this page was built from.

STM-32-PCB-Design: common questions

What microcontroller does the STM-32-PCB-Design use?

The STM-32-PCB-Design is built around the STM32F103C8T6, from the STM32 family.

How big is the STM-32-PCB-Design?

The STM-32-PCB-Design measures 48 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM-32-PCB-Design?

28 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM-32-PCB-Design design files?

From the Unmolsharma/STM-32-PCB-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM-32-PCB-Design design in my own project?

The repository has no license, so all rights stay with Unmolsharma. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM-32-PCB-Design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards