Cryosub power converter warm cold v01
uob-hep-cad·cryosub·hardware/uob-hep-pc068a-cryosub/cryosub_power_converter_warm_cold_v01/cryosub_power_converter_warm_cold_v01.kicad_pcb
About the Cryosub power converter warm cold v01 PCB
Cryosub power converter warm cold v01 is an open source PCB design by uob-hep-cad, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 34 × 45 mm, with 39 components from 32 distinct parts.
By type, the board carries 20 resistors, 6 transistors, 5 diodes, 5 capacitors and 3 connectors.
From the project
Design information for DUNE vertical drift readout of photon detectors over fibre ( cryo submarine )
git clone --recurse-submodules https://github.com/uob-hep-cad/cryosub.git
There are Python scripts that control the power to the "power over wires and a heating resistor" Cryosub and acquire temperature data located in the Scripts subdirectory.
There are three python processes that should be run in parallel
CryosubLoop.py - loops round reading demand values from database and writing to PSU. Measures actual values from PSU and the temperature
Cryosub power converter warm cold v01 bill of materials (BOM)
39 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IRLML2402TRPBF IRLML2402TR | SOT-23 | Q1, Q2 |
| 1 | AOD413A FDD306P | TO-252-3_TabPin2 | Q3 |
| 2 | IRLML2402TR | SOT-23 | Q4, Q5 |
| 1 | FDD306P | TO-252-3_TabPin2 | Q6 |
| 1 | CONN_02X04_ODD_EVEN Conn_01x02_Male | PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical_SMD | J2 |
| 1 | Conn_01x02_Male | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | MBR0580 B120-E3 | D_SMA | D1 |
| 1 | MBR0580 PTZTFTE255.6B | D_SMA | D2 |
| 1 | MBR0580 PTZTFTE2510B | D_SMA | D3 |
| 2 | RB751V40T1G | D_SOD-323_HandSoldering | D4, D5 |
| 1 | 0603-100NF-50V 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 30nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 1 | 0603-22NF-50V 30nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 49.9K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 0603-100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | 0603-100K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R12 |
| 1 | 0603-4K7 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 0603-200K 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0603-1K 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 0603-200K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 0603-4K7 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 0603-100K 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 0603-1K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 0603-330K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 2 | 0603-10K 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R15 |
| 1 | 0603-120K 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 0603-360K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 0603-10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 2 | 0603-10K 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 1 | 0603-100R 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
Cryosub power converter warm cold v01 design files
The KiCad project lives in the uob-hep-cad/cryosub repository on GitHub; these links point at the commit this page was built from.
Cryosub power converter warm cold v01: common questions
How big is the Cryosub power converter warm cold v01 PCB?
The Cryosub power converter warm cold v01 measures 34 × 45 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cryosub power converter warm cold v01?
39 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cryosub power converter warm cold v01 design files?
From the uob-hep-cad/cryosub repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Cryosub power converter warm cold v01 design in my own project?
Yes, under the terms of its GPL-3.0 license, which uob-hep-cad chose for the repository.